RyanU
12-27-2006, 06:43 PM
Its has a pretty good spray goin when Im driving i believe. cause its darn near covered everything. i took off the grill and inspected the cooler. i found that the leak is coming from the bottom part of the cooling fins near the fitting on the passenger side. i cant find the exact leak but i have a good idea. anyone have any advice of quick fixes so i can finish workin this week and get home on fri
dmaxalliTech
12-27-2006, 06:48 PM
get some hose and a couple clamps and bypass the cooler. Just run hose from one line to the other. Clamp it good! Double clamp would not hurt
Mike L.
12-27-2006, 07:04 PM
How far will you be driving because the trans will get hot with no cooler?
RyanU
12-27-2006, 07:32 PM
well ill be driving short distances and then ill be makin my trip home
also it really hasnt been about 40* here either, i dont know if that matters
also i have the mag-hytec high capacity pan
I have a stock cooler I'll give you if you want it next day aired...you pay shipping. I can pack it up tonight and send it in the AM. It is off my LLY, but should fit, right?
RyanU
12-27-2006, 08:06 PM
im gonna see what tomorrow brings, i might be able to get it brazed or something. how much are one of those from the dealer? does an allison dealer carry them also? what about autozone or somewhere would they have one?
dmaxalliTech
12-27-2006, 08:52 PM
Ryan, dont skimp on an aftermarket that wont handle the flow. Take Bobo up on his offer and you'll be farther ahead then anything
Mike L.
12-27-2006, 10:04 PM
I do not recommend cutting lines and using hose with clamps. There is a lot of pressure in those lines. Take BoBo up on his offer as it will be a 30 minute job exchanging coolers.