:D Man, Santa (Wife and Kids) was good to Me, I got a new Tool for the shop, IR 2135 inpact, 1000 ftlb in reverse! Can't wait to try it out! Got a few projects that need tear down, might just have to break it in Monday before we head out to another Christmas party.

Ingersoll Rand 1/2'' Titanium Impact Wrench -- View larger image
Ingersoll Rand 1/2'' Titanium Impact Wrench -- View larger image
Ingersoll Rand 1/2'' Titanium Impact Wrench
$269.00 & up

This new 1/2" impact can be described in one word, awesome! If it's a lightweight powerful impact wrench you're looking for, look no further. This impressive impact wrench weighs only 3.95 lbs and produces an incredible 1000 ft lbs of nut busting torque! You'll fall in love with this tool the first time you use it. Features a smaller hammer case to get in those tight areas, a 7-vane motor, and 4-position power control. Delivers 1250 blows per minute and 9500 RPM. Requires 5 cfm @ 90 psi. 2-5/8" wide, 7" high, 7-1/2" long.

Also available with 2" extended anvil.

#IR2135-WRENCH $269.00 & up:)

These new 1/2" ers are not the ones I grew up w/ willg et you introuble quickly, if you odnt really really watch it.

Its the best 1/2" impact made IMHO. I have had mine for 3 years with daily use, not easy stuff either. Keep it oiled and it will last a long time. Yea, be carefull with bolts 1/2" and small as it will twist them off.

I have always used atf in my stuff right or wrong seems to wokr

The cp turbo is a decent wrench for cheap

I think they were tired of me griping that my 15 year old Mac was not doing the job....Paid off :)

I have one of those bad mother truckers!!!! When i was working at the local international dealership I started off with a mac impact, biggest peice of **** I have ever had. There was another guy who had the IR 2135 and everyone ask to use his to break stuff that theirs woudlnt. So i got myself one. and wow that thing is beefy. being a semi truck mechanic trust me I put that impact to its test! our shops 3/4 drive impact couldnt bust stuff that my 1/2 IR 2135 could (mind you the shops 3/4 was older than me) That impact is the best and sounds like a ****ing big block with a huge bumpy stick! I love that impact.

i have one of those best 1/2 impact imo

The cp turbo is a decent wrench for cheap

The CP Turbo is one of the biggest air hogs out there....Seems to need 1/2" hose to work properly..

Give me the IR2135Ti any day..:D

I have the MT 1769 from matco which is identical to the IR 2135ti and i have the 3/8th's IR 2115ti and both of these guns are awesome for power and are nice and light. I used the 3/8th's quite often for tire rotations on cars and light trucks just so i wouldnt have to carry the bigger gun. Always torqued the lugs by hand, didnt always trust torque sticks on some vehicles. Used to use the IR Thunder Gun, this was a highly over rated heavy lump that was to loud and the exhaust exited the front of the gun blowing dust up in your face. Gave that pile away to a new kid that had a gun that was even worse. Good ridance!!

The CP Turbo is one of the biggest air hogs out there....Seems to need 1/2" hose to work properly..

Give me the IR2135Ti any day..:D


Damn I missed the boat, when I bought mine I only found the IR2131, the composite one. That has been a couple years though, how long have the 2135's been around?

Damn I missed the boat, when I bought mine I only found the IR2131, the composite one. That has been a couple years though, how long have the 2135's been around?


Not sure but I bought mine about a month prior to this thread starting.

Nothing wrong with a 2131 either really....small power increase and that's about it.

The titanium ones came out in mid 2003 IIRC.

Man, Santa (Wife and Kids) was good to Me, I got a new Tool for the shop, IR 2135 inpact, 1000 ftlb in reverse! Can't wait to try it out! Got a few projects that need tear down, might just have to break it in Monday before we head out to another Christmas party.


I use one of those where I work... Very cool! It's a very strong impact. That's got to be one of the best impacts you could buy for automotive use! :cool2:

Of course, where I work we also have one of the new IR 3/4" drive impacts... :D You just about need two people to use it... It is so big I don't like it. Too heavy and hard to use... ):h

The CP Turbo is one of the biggest air hogs out there....Seems to need 1/2" hose to work properly..

Give me the IR2135Ti any day..:DWhat is the real difference between these IR impact wrenches? Looking in Sears website they appear to have similar specs, but the IR-2135Ti-R is on sale right now for $233.99 thru 2/24/07 (reg price $259.99)

IR-2135 (http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&cat=Compressors+%26+Air+Tools&subcat=Automotive+Air+Tools&pid=00919276000) ($259.99)

IR-2135Ti R (http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&cat=Compressors+%26+Air+Tools&subcat=Automotive+Air+Tools&pid=00919278000) ($233.99)

They also have the IR-2135QTi-2 (Quiet) (http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00919677000&cat=Compressors+%26+Air+Tools&subcat=Automotive+Air+Tools) on sale for $260.99

Thanks.

Looks to me that the wrenches are the same but the sale item is a package with case and gloves.

i've got the same one...i'll never buy a different impact

I use one of those where I work... Very cool! It's a very strong impact. That's got to be one of the best impacts you could buy for automotive use! :cool2:

Of course, where I work we also have one of the new IR 3/4" drive impacts... :D You just about need two people to use it... It is so big I don't like it. Too heavy and hard to use... ):h
have you ever had your piddies on one of IR's 1" impacts....using one makes you look like this:D

The IR titanium kicks it. I used this to take off big truck wheels. I have also used it to remove pinion nuts. Company I work for bought them for all the servece trucks.

I just picked one up at a local swap shop for $75.00 new. He had about 7-8 used guns on the shelf with a $60-70 price tag. I was going to get one of those and asked him if they were all good. Then he said I have a few new guns in the back for $75.00.