do you take the bullydog off before you install the edge? i took mine off and installed the edge, now my bullydog will not go past the reading engine mode. so what gives?

A harness module, like the Juice could interfere with the programming process of a tuner. I would disconnect the Juice whenever you plan on reprogramming the computer with a tuner, the reconnect the Juice when you are done programming.

that is what i just did, worked fine, evidentally, the bullydog cant read the ecm runnin thru the juice. but she runs like a dream now.... im runnin bully dog on level 2, and edge on 3, pretty good, but the turbo makin 33 lbs or boost! i thought 32 was the max!

WOuld and edge work on my truck with the Bully dog triple dog? how does Stacking Programmers work?

I just stacked the bully dog pup with the juice. I have the bully dog on tow/econ (level 1) and have run the juice on all the levels including level 6 hot --- Wow!! :ro) I only give it some throttle for short bursts. I am planning on leaving the juice on level 1 2 or 3 only but I don't have a lot of self control and I know I will end up cranking it up..... I need to keep saving for the suncoast upgrade!!:gr_grin: