Question..those of you with H2s, I trimmed the plastic airdam for clearance, and that is working fine. At extreme turning angles it comes within an inch of where the plastic meets the metal part of the bumper. So did ya'll trim the metal too or did you just live with this?

I only trimmed the plastic and never an issue. Can't say that about at the rear of the front innerfender though. Mine rubs slightly backing over curbs with weight on.


http://dieselplace.com/forum/uploads/Air_dam_trim_sml.jpg

I only trimmed the plastic and never an issue. Can't say that about at the rear of the front innerfender though. Mine rubs slightly backing over curbs with weight on.





Same here.

Well when I turn it all the way, it comes within an inch, witht he wheels straight it looks just like that blue one...

I cut at least 1.25 inches of metal off in the front, and almost as much in the back.


http://www.ntinnovations.com/Duramax/images/medium/RightFront.jpg