MAX BOWTIE
12-13-2006, 09:03 PM
Hey guys, does anyone know what size socket I need to remove the front seat on my truck? I know it's a torx socket, just need to know what size socket is required. Thanks
|
trukworx 12-13-2006, 09:14 PM you dont need that goofy socket, take a 15mm deep 6 point socket , works fine mad 12-13-2006, 09:27 PM you dont need that goofy socket, take a 15mm deep 6 point socket , works fine :exactly: Dr_goodwrench66 12-13-2006, 09:48 PM Inverted torx socket is an E18EP(snappy part number). MAX BOWTIE 12-14-2006, 06:36 PM You guys are on it! Thanks dlshunter 01-14-2007, 05:43 PM On the Front Seat, the nut at the forward end is the 15mm or the Snappy (Snap-On?) part # mentioned, but the nut at the Rearward end of the Front Seat is smaller and appears to have a slightly different appearance than that of an Torx Nut Any ideas on that one?. trukworx 01-24-2007, 10:10 PM its either a 10 or 11mm six point, cant remember | ||