My uncle recently installed the Edge w/ attitude in his '03 CC. When the Attitude is hooked up, there is a minimal improvement (Not noticiable) But, when he disconnects the Attitude, there is a huge improvement.


Has anyone had this problem?

You know that you have to set up the Attitude, right?


Then you should be able to change power levels with the touch of a button and get even an extra step of power increase.


If you've set the parameters in the Attitude and it won't change power levels, or says it changes them but nothing happens, then you'll need to call Edge.

I would set the display on the Attitude for 4 views.


Set for Boost....EGT if the Pyro is hooked up........Gear........and Throttle.


When the 4 display is showing the upper right hand corner will have a small number...that is your level........


You can set it from 0-5 with the up down arrows on the keypad.


Or check the level while running, step on brake and move selector from Park-Reverse-Neutral-Reverse-Park, it will then short rev the engine.


Count the revs to confirm level.


If you are running the Pyro see what the EGT Backdown is set for......





Thttp://www.dieselplace.com/forum/smileys/Big Smile.gifNY

When you plug the attitude in it will default to zero. Press the arrow up a few times and hang on! You will see a number in the top right hand corner that will probably be at 0 when you start. This is the power level.