Has anybody put 285 75 16 tires on their stock 3/4 tons. I talked to a guy today and he said that he had to crank his torsion bars about 1". I was wondering if i had to crank on my bars and get an alignment or if they would fit. Thanks inadvance.

I ran mine at stock height with 285's for about a year or so with no major problems. Only rubbed a bit on the front valance in reverse with the wheels turned.

i went up 6 turns on the t-bars and everything works just fine.

Thanks a lot guys.

Im running true 35s with just crank and trimming