66flh
11-10-2006, 01:56 AM
Today I gave er' hell with the Edge on 5,hear a chime and the ABS light is on.I pull over shut it off it's still on.I put it in reverse and it shut off.As soon as I put it in D and took off,it chimed and ABS was on again.Came home and let the truck sit for about 4 or 5 beers,fired it up and guess what?No ABS light.Would the Edge cause this?I did a search and couldn't find this same problem.Anyone?I had the tow/haul on when it happened.Went through 1st,2nd,3rd when the light came on.:confused:
66flh
11-11-2006, 02:08 AM
ABS light is on again.Anyone?
26899
11-11-2006, 06:05 PM
go get your computer reflashed at the dealer remove the edge before you go in.
My abs use to come on only because I re-geared it 4.63
duramaxdiesel
11-11-2006, 06:06 PM
Could be the sensor. Also my ABS light would flicker on and off when my wheel bearing went out. Just my $.02
Spitz
11-11-2006, 11:12 PM
Pull the code and go from there.
66flh
11-18-2006, 02:29 AM
After I replaced my wheel bearing,Apparently I did a half a$$ job of securing the ABS cable to the spindle.I went and got it scanned at the dealer today and it pointed to the rt. front sensor.I checked it twice yesterday and failed to notice where the tire rubbed the cable raw.I spliced it and guess what,NO more code.