Anyone install an aftermarket exhaust with a Helwig or Fredrico rear sway bar? Here is a pic of how close it is.

I did. I had to shove my tailpipe over and the endlink was right up against it. I made a new muffler side bracket with another 1 1/2" offset vs stock frederico bracket. Now I have about 1/2" clearance. If I had a clue how to insert a link from another post I made you could see a picture of the bracket I made. If you want to see it go to 3500 Topic and look for the "sway bars on a dually" thread.

I just had my tail pipe cut shorter so it goes on the other side of the swaybar bracket and the spare tire.

my exhaust hanger was broken when I did the install on the sway bar kit went to a shop to get the hanger rewelded and they added another hanger on the other side and now I have even space between the spare and the hanger for the sway bar.

Does anyone have pics of how they cleared it? Here are a few pics of mine and right now, no "easy" ideas on how to fix it. Help...

you could try prying the factory hanger(the one that the rubber thing is hanging on) over a inch or so. will give more side to side and a little bottom room too.