I've seen pictures of them. Who built theres or where did you have it built. How do you like them, and what size Solobaric do you have back there and how many?





Chris

Chris,


Here's one I built for my '02 (had to shorten it lengthwise for the '04). It's 3/4" MDF and is about .76 cubic feet and sounds damn good with a 12". With a little redesign, I'm sure you could make one to fit a square SOLOBARIC. If you do a cardboard mock-up first they're pretty easy to build.


http://www.dieselplace.com/forum/uploads/77B_soloboxamp.jpg


http://www.dieselplace.com/forum/uploads/8C3_soloboxtop.jpg


Josh

Josh, are you still using the stock radio/CD? If so, where are you getting the signal from for the sub?

Marc,


I'm using the stock head unit (XM/6 Disc). I used a PAC AOEM-GM24 interface (like $45). It plugs into the stock head unit and wiring (plug and play), and provides a set of RCA pre-outs. It puts out a nice clean signal too.


Josh

gmcslehd, where did you get the connector? online or a local radio store?

95geo,


Got it at: http://www.buy.com/retail/product.asp?sku=90129366&loc=111&sp=1


Josh

can anyone tell me what the difference between the AOEM-GM24 and the C2A-GM24, they seem to do the same thing except the c2a is about 2x the price

the C2A-GM24 is 2 channel, not 4, but more importantly, it is not sierra/silv compatable, rather for the denali etc.

GMCSLEHD


NNNNNNIICCCCEEEE box you built. I bet it does pound when you want it to huh? I built a box but for only a 10 and it doesnt sound too bad. I mounted my amps on the back of the rear seat.


Ben http://www.dieselplace.com/forum/smileys/Rock On.gif

gmcslehd do you know if that works for 02 trucks or just 03-up

blnagel,


Thanks, it doesn't sound too shabby.http://www.dieselplace.com/forum/smileys/Rock On.gif


chevmeister,


I assume your reffering to the AOEM-GM24 interface? On the package, it only lists it as working for the '03-'04 Sierras. I'm sure PAC makes one for the '99-'02's though.http://www.dieselplace.com/forum/smileys/Big Smile.gif


Josh

GMCSLEHD


What is the covering material over the box? I like that look rather than the fabric I put on mine. Just wondering what it is and how hard to put on.


Ben

blnagel,


It's black "Hammerite" spray paint (HomeDepot) over grey primer. It has a slight texture and is fairly tough. http://www.dieselplace.com/forum/smileys/Big Smile.gif


Josh

Thanx! Will pick some up.


Ben