You can read about it here. (http://www.dieselplace.com/forum/forum_posts.asp?TID=11560&amp;PN=1&amp;TPN=1)</A>





GregEdited by: LanduytG

Greg, thats a very nice product.

But I hardly have enought fuel coming out of the bleed screw before I close the bleed screw. Are you guys doing something different for purpose/need of the device?

I have a tendency to bleed a lot of fuel because to me its better than letting the motor crank over extra time. With this when you pump the filter full you will get a good stream with no air. You are then good to go and it will start no problem. i let it just because I don't have fuel all over the top of the filter head to clean up.

Greg

Looks good Greg an I would have one but I got one of them dirty valves if you know what I mean (mega). Your stainless bleeder has never been used but it looks good settin up there all pretty an shiney.


Geno

Greg, Don't forget to bring me one of those to the DPR next weekend. I will take one for sure. Need more than a gallon of oysters?

motovet

i hope to have them in time to bring, my supplier is trying to make it happen.

As for the oysters I think a gallon will be enough. But you might want to bring and extra half gallon just in case.

Greg