|
shepcal 10-29-2006, 12:54 PM Bought the programmer mainly to adjust speedo and tire size. The instruction manual says you must remove fuses to Onstar; and gave locations for 2001-2002 and 2003-2005. This is not the same for 2007. I've been pulling fuses and it doesn't drop out. Any ideas? Thanks, Shep RYDNHI4x4 10-29-2006, 08:05 PM I don't know Hypertech works, but I bought a Predator and didn't have to pull any fuses for the On-Star. I only had to pull 3 fuses and they were all for the radio. rknrollo 10-30-2006, 10:24 AM Just pull the one that says info TIM Z 10-30-2006, 07:35 PM i didnt pull any fuses, but i was in my garage and i dont think it gets a clear signal bieng under a metal roof. No probs at all. rknrollo 10-30-2006, 08:22 PM yep you can do that too....... shepcal 10-30-2006, 10:30 PM Pulled the info fuse, plus those to radio and anything else that looked possible; light didn't go out. Great idea tho, will put a piece of aluminum foil over it, maybe an old goldpan or such. Never would of thought of that! You guys are great!:grd: avis 10-30-2006, 11:51 PM Does the new Onstar antenna unscrew like the 04/05 trucks? Might be an option for a no service signal if it does. | ||