i wanna see some wheels. i know this was done before but now i am looking at some and need to copy somebody so lets see em.

crappy pic, but all i have at work.


http://www.dieselplace.com/forum/uploads/BB3_ion138.jpg


http://www.dieselplace.com/forum/uploads/88E_138.jpg

Rickles,


What Model Truck.....2500 or 3500?

Here's my Alcoa Dually Hot Shot's


http://www.dieselplace.com/forum/uploads/895_6_04_Dually-12_Print_Email.JPG


http://www.dieselplace.com/forum/uploads/testing_089_Email.JPG

Here's a pic. of mine. 285x75x16 BFG KM mud-terrain on 16x8 Weld Sidewinders with 4 5/8 backspacing and Conehead centers. They us the factory lug nuts.


Hope this helps,


Matthew


http://www.dieselplace.com/forum/uploads/uploading_002_SMPLE.jpg


http://www.dieselplace.com/forum/uploads/56D_uploading_021_SMPLE.jpg

<TABLE cellSpacing=0 cellPadding=0 width="100%">
<T>
<TR>
<TD width=20 height=20>http://mct.truckmoxie.com/world/lastarrow.gif (http://mct.truckmoxie.com/showownerpic.ten-u-6315-n-132103-album-1) </TD>
<TD width="100%" background=/world/nextprevsep.gif height=20> </TD>
<TD width=20 height=20>http://mct.truckmoxie.com/world/nextarrow.gif (http://mct.truckmoxie.com/showownerpic.ten-u-6315-n-132098-album-1) </TD></TR></T></TABLE>
<CENTER><A href="javascript history.back();" target="_blank">
<CENTER></A>http://mct.truckmoxie.com/gallery/craig04/132103.jpg (javascript history.back();)<A href="javascript history.back();" target="_blank">
</CENTER> </A></CENTER>

<TABLE cellSpacing=0 cellPadding=0 width="100%">
<T>
<TR>
<TD width=20 height=20>[/url] </TD>
<TD width="100%" background=/world/nextprevsep.gif height=20></TD>
<TD width=20 height=20>[url="http://mct.truckmoxie.com/showownerpic.ten-u-6315-n-132098-album-1"] (http://mct.truckmoxie.com/showownerpic.ten-u-6315-n-132103-album-1) </TD></TR></T></TABLE>
<CENTER>http://mct.truckmoxie.com/gallery/craig04/132102.jpg (javascript history.back();)</CENTER>

285 Yokohama Geolanders wrapped around chrome Weld EVO Velocity 8's


http://www.dieselplace.com/forum/uploads/911_03_GMC_N2_small.jpg


http://www.dieselplace.com/forum/uploads/03GMC_2-A.jpgEdited by: 03GMC2500HD

MB Motoring Rockers with 265 75 R16's:


http://www.dieselplace.com/forum/uploads/4D8_Truck.JPG


http://www.dieselplace.com/forum/uploads/818_P4270127.JPG

CHROMED H2'S


http://www.dieselplace.com/forum/uploads/Cropped_H2_rim_&amp;_tire.jpg


Thttp://www.dieselplace.com/forum/smileys/Clown.gifNY

Oasis 20x9.5 Kuhmo 305's


http://www.dieselplace.com/forum/uploads/42D_DSCF0003.JPG

Diesel Dragon


What brand are your running boards? Do they help keep the crap off the front of your rear fenders?

Hi Rmax,


Those bars are not running boards, there Putco Boss 4" Nerf bars. And they don't help keep anything off the side of the truck.


I've seen some pictures posted of some nice running boards for dually's that flare out in front of the fender and even put a piece behind the fender. I think he had 19.5" wheels on his truck but I can't remeber who. Do a search for 19.5" wheels and it should come up. Green colored truck I think.


http://www.dieselplace.com/forum/smileys/Rock On.gif Diesel Dragon http://www.dieselplace.com/forum/smileys/Cool.gif


P.S. Ok I found it it was Tulsa 1718's truck, and they are Putco's too but their a full running board set. They look very nice on his truck. Look under the For Sale section: Update: Rim's for sale 19.5 Alcoa 265/70 (wish I knew how to do a direct link).


Or go look at Putco's web site www.Putco.com (http://www.Putco.com)


Hope this helps.http://www.dieselplace.com/forum/smileys/Big Smile.gif


P.P.S. or is it P.S.S. http://www.dieselplace.com/forum/smileys/Confused.gif


Don't worry about Putco's pricelist you can find them a lot cheaper at retailer's


Edited by: Diesel Dragon

.

http://www.dieselplace.com/forum/smileys/Rock On.gif

http://www.sandbros.com/mikesride/chevy/dmax/steps_wheels/full.jpg








http://www.sandbros.com/mikesride/chevy/dmax/steps_wheels/ring.jpg

That is a COOL looking wheel, Mike!

http://www.dieselplace.com/forum/uploads/wheel_and_tire_resized.jpgHere's a pic of my 18x10 velocity 8 XT'S. I really like the big offset. it look good. IMO


Edited by: allstok03Dmax

Hey Diesel Dragon, I guess we think alike!!!! Alcoa Hotshots, stock tires.

http://www.dieselplace.com/forum/uploads/592_truck.jpg

dndj,


Now that is one Dam good looking Truck. http://www.dieselplace.com/forum/smileys/Thumbs Up.gif


Wish I had one that looked like that


http://www.dieselplace.com/forum/uploads/6_04_Dually-11_Email.JPG http://www.dieselplace.com/forum/smileys/Big Smile.gif





http://www.dieselplace.com/forum/smileys/Rock On.gif Diesel Dragon http://www.dieselplace.com/forum/smileys/Cool.gif

Mike330R


Those are some good looking rims.


Do you have any pics of them mounted on the truck yet?

Not yet. I am still waiting on tires *grrr* Should be here soon.


Toyo AT's. Once they are here it will get the lift and dual fox shocks :)








Mike330R


Those are some good looking rims.


Do you have any pics of them mounted on the truck yet?

How did this topic get all the way to the bottom of page 3 ? http://www.dieselplace.com/forum/smileys/Shocked.gif


Mike, let's see those tires and rims. Inquiring minds want to see. http://www.dieselplace.com/forum/smileys/Big Smile.gif

No tires yet :(.


Toyo never had a 35x17" tire before. they are on a boat due in any day.

here's minehttp://www.dieselplace.com/forum/uploads/BZ8_johns_truck.JPG

here's a closer veiw


http://www.dieselplace.com/forum/uploads/638_johns_rear_wheel.JPG

My work in progress. Weld Cheyenne 8 Nitto 365/65R16

http://www.dieselplace.com/forum/uploads/725_img_0192.jpg

Mike 330R,


Are those the KMC XD series?

Yes XD 325 which are currently discontinued. It was the last set they had.


They may bring them back.


I tried for a set of the 315's but they are now being made overseas and were "on a boat".


So now I am still waiting on Toyo's which are also "on a boat".


I may just buy a set of other wheels and be done. I am tired of waiting to add the lift! http://www.dieselplace.com/forum/smileys/Ermm.gif

Sweet looking rim. I was considering them before I saw the Robby Gordon rims, although I hadn't seen the 325's. I think yours are the best looking of the series.


If you are having trouble with the Toyo's, why not just get another brand. There are many tires out there in 35x17's. Are you looking for M/T's or A/T's? I got a set of Open Country SXT M/T's in 35x17x12.5 for a pretty reasonable price, and I gotta say they look pretty nice, plus ride great. Of course, I am a little biased.

Not the real deal but this is the best I could $'s. Still better then the grey stock. The setup Tulsa1718 is sweet.


http://www.dieselplace.com/forum/uploads/1C4_nxtgenwax3sidepic.jpg





http://www.dieselplace.com/forum/uploads/FDA_newwheels.jpgEdited by: dmaxscott

Anyone got pix of a SRW Chevy/GMC with plain ol' 16" Alcoa's? I'm thinking seriously about getting some at the same time I get rid of the factory pizza-cutter tires.


Thanks in advance.

All of my lift parts (CST, FOX, KMC) I got for a really good deal for an article and a show it will be in, in September. So I am trying to wait.


I am not going to wait much longer than this week.
The wheels are not the correct offset. they are 3.5" (I think) and should be closer to 4 5/8" but I can deal with that for now.


Toyo told me they never made a 35" tire in 17" rim size but you have a set? 12.5 wide is to wide for me as I am pretty sure they would rub.


I would prefer A/T's as I drive on the road 70% of the time and A/T's seems to work better in the sand which is where it will be used most.








Sweet looking rim. I was considering them before I saw the Robby Gordon rims, although I hadn't seen the 325's. I think yours are the best looking of the series.


If you are having trouble with the Toyo's, why not just get another brand. There are many tires out there in 35x17's. Are you looking for M/T's or A/T's? I got a set of Open Country SXT M/T's in 35x17x12.5 for a pretty reasonable price, and I gotta say they look pretty nice, plus ride great. Of course, I am a little biased.

http://www.dieselplace.com/forum/uploads/C8B_Jul10031.JPGhttp://www.dieselplace.com/forum/uploads/DFZ_jul11010.jpg Edited by: CPMac

What wheels are those?


And how do you fit those wide wheels on there cuz your truck looks stock?

Toyo told me they never made a 35" tire in 17" rim size but you have a set? 12.5 wide is to wide for me as I am pretty sure they would rub.


I would prefer A/T's as I drive on the road 70% of the time and A/T's seems to work better in the sand which is where it will be used most.











Sorry Mike 330R,


They are not Toyo's Open Country. They are Radial Mud Terrain SXT's made by Dean? Anyway, my bad. The point I was trying to make is you have a ton of options for 35x17 tires.

These are the tires I used to have.


http://www.dieselplace.com/forum/uploads/563_DSCN0625_2.JPG

These are the Radial SXT's


http://www.dieselplace.com/forum/uploads/DSCN0648_2.JPG

Looks like Dean is Copper Tires.


I will call them in the morning and see what they can do. Thanks!


http://www.dieselplace.com/forum/smileys/Big Smile.gif

Mike 330R,


Are those the KMC XD series?








Are they chrome of polished, polished are going to be a bitch to take care of.

polished. That's better because chrome chips to easy. I can always repolish.

What wheels are those?


And how do you fit those wide wheels on there cuz your truck looks stock? CPMac posted those pics for me. They are Eagle wheels style 114 (18 x 9.5's with 6 inches of backspacing.) The tires are ProComp X-Terrians 325/60R/18's The truck has no lift mods. They really fit the truck nice.

These are the tires I used to have.




HD4fun - why did you *used* to have them? I'm looking at buying a set of the Robby Gordon wheels - did you have problems with them?

Allright guys - move over for big daddy and the finest set of wheels you'll ever see. First, let's start with my main ride, the Transformer, with some pimpin' 1-1/4" wheels, on 1/4" plastic:


http://www.dieselplace.com/forum/uploads/442_vm1.jpg


Next, I'd like to introduce you to my other ride, with the finest set of wheels in any third-world country, the true chick magnet, the Aztec:


http://www.dieselplace.com/forum/uploads/Z6D_aztek3.jpg

bump


lets see more, guys!!

http://www.dieselplace.com/forum/uploads/dura_10.JPG

http://www.dieselplace.com/forum/uploads/4C2_45.JPG

dwrat,


Love the truck and wheels!! do you find that the steering is busier with the low profile tires, and did you sacrifice a nece ride for the look? I did a similar switch on a Sequoia, and it seems that I'm always making steering corrections.

I just ordered these wheels:


Eagle 137's





http://www.dieselplace.com/forum/uploads/A58_3d_1.jpeg


http://www.dieselplace.com/forum/uploads/8ZD_1080698896769_DSC00008.jpeg


I will be mounting some 265/75 revo's on them. Will upload a pic when I get them installed.

Here are the 137's mounted on 265/75 Revo's.





http://www.dieselplace.com/forum/uploads/9AC_2004_0828Image0093.JPG


http://www.dieselplace.com/forum/uploads/A5F_2004_0828Image0091.JPG


http://www.dieselplace.com/forum/uploads/A23_2004_0828Image0092.JPG

Chrome H2's with factory caps. http://www.dieselplace.com/forum/uploads/581_Truck-Pic..gif

What offset do you guys recommend for aftermarket wheels? Is off-set measured from the mounting surface to a plane equal to the edge of the inner rim? Thanks guys.

Here's my babies. You can see the Smart Tires ring on the valve stem - let's me check pressure and temperature for all tires while I'm driving - same system that the stock Escalades come with.

Nice Wheels :cool:

CalDirt:

I like those RG-1's - where did u buy them - and did you get the monitoring system at the same place?

Got the wheels at 4 Wheel Parts - would have preferred going elsewhere but that's the only place I could find that carried them. I did have an unusually good experience this time though - the rep that helped me was actually professional and customer oriented.

Got the monitoring system from Vulcan (http://www.vulcantire.com/smartire_sys.htm)

Item / Mfgr Model / Vendor Model / Price
Tire pressure monitoring system 060-1004 or 080.1004 11000 199.00
Full Function Remote Display 200.0068 or 061.4001 11011 44.00

Here are my Max Helo rims, with and without caps

west coast truckhttp://www.glamisdunes.com/photopost/watermark.php?file=500/3506P2280004-med.JPG

Wheres the black wagon wheels at i know sumone has gotta have them.

Mine:

http://memimage.cardomain.net/member_images/1/web/781000-781999/781637_5_full.jpg

craig- what are those rims/ how much and where?