VIN Number check PLEASE [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums
PDA

: VIN Number check PLEASE

blnagel
06-23-2004, 08:19 PM
I purchased a 2002 Dmax with 68000 miles. Could someone please let me know anything for this number.


1GCHK23102F151224


Thanks, Ben
BassinRVer
06-24-2004, 02:40 PM
Here the bad news, you have a savaged titlehttp://www.dieselplace.com/forum/smileys/Big Smile.gifhttp://www.dieselplace.com/forum/smileys/Big Smile.gifhttp://www.dieselplace.com/forum/smileys/Big Smile.gif Edited by: BassinRVer
BassinRVer
06-24-2004, 02:43 PM
Here is the good news, based on your vin number you are covered under the Special Policy for the injectors for 7 years or 200,000 miles.http://www.dieselplace.com/forum/smileys/Big Smile.gif http://www.dieselplace.com/forum/smileys/Big Smile.gifhttp://www.dieselplace.com/forum/smileys/Big Smile.gifEdited by: BassinRVer
jholly
06-24-2004, 03:51 PM
Here is the good news, based on your vin number you are covered under the Special Policy for the injectors for 7 years or 200,000 miles.http://www.dieselplace.com/forum/smileys/Big Smile.gif http://www.dieselplace.com/forum/smileys/Big Smile.gifhttp://www.dieselplace.com/forum/smileys/Big Smile.gif

If it is a salvage title it is not covered. http://www.dieselplace.com/forum/smileys/Dead.gif A salvage title voids any and all warrenties.

Jim
jholly
06-24-2004, 03:53 PM
Here the bad news, you have a savaged titlehttp://www.dieselplace.com/forum/smileys/Big Smile.gifhttp://www.dieselplace.com/forum/smileys/Big Smile.gifhttp://www.dieselplace.com/forum/smileys/Big Smile.gif

If it is a salvage title and the dealer did not disclose this fact you probably have a case.

Jim
BassinRVer
06-24-2004, 03:55 PM
I was just making some fun. I have no idea if its savaged.
blnagel
06-24-2004, 05:49 PM
That is not funny whatsoever Bassin. My heart started to beat rapid and I went into cardiac arrest! I had to self-revive myself and pick my limp body off the floor! Any true info would be helpful guys.http://www.dieselplace.com/forum/smileys/Rock On.gif
jholly
06-24-2004, 06:12 PM
That is not funny whatsoever Bassin. My heart started to beat rapid and I went into cardiac arrest! I had to self-revive myself and pick my limp body off the floor! Any true info would be helpful guys.http://www.dieselplace.com/forum/smileys/Rock On.gif

sorry for the wear and tear on the pucker string.

Jim
blnagel
06-24-2004, 06:24 PM
No prob I do like a good joke and I must admit that that was a good un. Seriously, how do I find out about my VIN number? Benhttp://www.dieselplace.com/forum/smileys/Rock On.gif
Max Power
06-24-2004, 06:57 PM
Someone will dig up the info for you. GMCSID is usually the one who does it.
BassinRVer
06-25-2004, 08:10 AM
Ben,


You have been now been initiated to the Duramax Club. You have to watch out for jokers thought. One of the best performance mods you can make it is taking out the bearing in your muffler, it really gets the exhaust flowing when you take it out.
GMCSID
06-25-2004, 11:09 AM
It looks like you've had 3 injectors replaced. The last was before the new bulletin for all 8 came out. Make you sure you work the truck hard every once in a while because if you dont, you will never need max fuel pressure and you might not know if another injector is going.



<TABLE cellSpacing=0 cellPadding=5 width="100%">
<T>
<TR>
<TD colSpan=5>
<CENTER>CLAIM HISTORY </CENTER></TD></TR></T></TABLE>
<TABLE cellSpacing=0 cellPadding=5 width="100%" bgColor=beige border=1>
<T>
<TR>
<TD width="10%">
<CENTER>R.O Date </CENTER></TD>
<TD width="10%">
<CENTER>R.O Number </CENTER></TD>
<TD width="5%">
<CENTER>Type </CENTER></TD>
<TD width="60%">
<CENTER>Labor Operation </CENTER></TD>
<TD width="15%">
<CENTER>Odometer Reading </CENTER></TD></TR>
<TR>
<TD width="10%">
<CENTER>01/12/2004 </CENTER></TD>
<TD width="10%">
<CENTER>002243 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">J5650 - INJECTOR, FUEL - REPLACE </TD>
<TD align=right width="15%">67599 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>07/30/2003 </CENTER></TD>
<TD width="10%">
<CENTER>001945 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">J4820 - MODULE, GLOW PLUG CONTROL (DIESEL) - CONTROLLER/RELAY - RE </TD>
<TD align=right width="15%">49361 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>07/23/2003 </CENTER></TD>
<TD width="10%">
<CENTER>044346 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">J5650 - INJECTOR, FUEL - REPLACE </TD>
<TD align=right width="15%">48604 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>06/13/2003 </CENTER></TD>
<TD width="10%">
<CENTER>001126 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">J5650 - INJECTOR, FUEL - REPLACE </TD>
<TD align=right width="15%">40873 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>02/15/2003 </CENTER></TD>
<TD width="10%">
<CENTER>000494 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">K5228 - SWITCH, PARK/NEUTRAL POSITION - REPLACE </TD>
<TD align=right width="15%">33899 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>02/15/2003 </CENTER></TD>
<TD width="10%">
<CENTER>000494 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">N2821 - RELAY - FUEL SYSTEM - REPLACE </TD>
<TD align=right width="15%">33899 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>11/05/2002 </CENTER></TD>
<TD width="10%">
<CENTER>000087 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">K5180 - CABLE, SHIFT CONTROL - REPLACE </TD>
<TD align=right width="15%">30927 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>11/05/2002 </CENTER></TD>
<TD width="10%">
<CENTER>000087 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">K5244 - LINKAGE, SHIFT - SHIFT LINKAGE - ADJUST </TD>
<TD align=right width="15%">30927 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>11/19/2001 </CENTER></TD>
<TD width="10%">
<CENTER>A51224 </CENTER></TD>
<TD width="5%">
<CENTER>I </CENTER></TD>
<TD width="60%">Z7000 - PRE-DELIVERY INSPECTION - BASE TIME </TD>
<TD align=right width="15%">0 miles </TD><
blnagel
06-25-2004, 11:13 AM
How do I know if one injector is going or not? How do I take out the bearing of the muffler? Thanks Benhttp://www.dieselplace.com/forum/smileys/Rock On.gif
BassinRVer
06-25-2004, 11:20 AM
Here is a good picture of how the bearing is removed, ENJOY!!!!


http://dieselplace.com/forum/forum_posts.asp?TID=9202&amp;KW=muffler+bearingEdited by: BassinRVer
jholly
06-25-2004, 11:34 AM
Make you sure you work the truck hard every once in a while because if you dont, you will never need max fuel pressure and you might not know if another injector is going.


In your opinioh what is working the truck hard? I don't have a 20,000lb. 5th wheeler to pull.

Jim
GMCSID
06-25-2004, 10:57 PM
In your opinioh what is working the truck hard? I don't have a 20,000lb. 5th wheeler to pull.

Jim


Just a full throttle pass on the freeway will get the pressure to maximum.
jholly
06-26-2004, 12:46 AM
Just a full throttle pass on the freeway will get the pressure to maximum.

Ah, piece of cake. Suppose eating a ricer would do alsohttp://www.dieselplace.com/forum/smileys/Evil Smile.gif

Jim
TCosgrove
06-26-2004, 03:51 PM
GMCSID


How bout checking this one for me please.http://www.dieselplace.com/forum/smileys/Approve.gif


3gkfk16zx3g204812,g,


and


1gthk29244e252078,g,





thanks Cosgrovehttp://www.dieselplace.com/forum/smileys/HiHi.gif
GMCSID
06-26-2004, 07:30 PM
<TABLE cellSpacing=0 cellPadding=5 width="100%">
<T>
<TR>
<TD colSpan=5>
<CENTER>3gkfk16zx3g204812</CENTER>
<CENTER>CLAIM HISTORY </CENTER></TD></TR></T></TABLE>
<TABLE cellSpacing=0 cellPadding=5 width="100%" bgColor=beige border=1>
<T>
<TR>
<TD width="10%">
<CENTER>R.O Date </CENTER></TD>
<TD width="10%">
<CENTER>R.O Number </CENTER></TD>
<TD width="5%">
<CENTER>Type </CENTER></TD>
<TD width="60%">
<CENTER>Labor Operation </CENTER></TD>
<TD width="15%">
<CENTER>Odometer Reading </CENTER></TD></TR>
<TR>
<TD width="10%">
<CENTER>04/20/2004 </CENTER></TD>
<TD width="10%">
<CENTER>145311 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">B0506 - FILLER, FRONT BUMPER - CENTER - R&amp;R OR REPLACE </TD>
<TD align=right width="15%">2 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>03/26/2003 </CENTER></TD>
<TD width="10%">
<CENTER>124695 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">V0987 - 03011 - REPROGRAM PDM - INC REFRESH IF NECESSARY </TD>
<TD align=right width="15%">3 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>01/03/2003 </CENTER></TD>
<TD width="10%">
<CENTER>A04812 </CENTER></TD>
<TD width="5%">
<CENTER>I </CENTER></TD>
<TD width="60%">Z7000 - PRE-DELIVERY INSPECTION - BASE TIME </TD>
<TD align=right width="15%">0 miles </TD></TR></T></TABLE>
<TABLE cellSpacing=0 cellPadding=5 width="100%">
<T>
<TR>
<TD colSpan=5>
<CENTER>1gthk29244e252078</CENTER>
<CENTER>CLAIM HISTORY </CENTER></TD></TR></T></TABLE>
<TABLE cellSpacing=0 cellPadding=5 width="100%" bgColor=beige border=1>
<T>
<TR>
<TD width="10%">
<CENTER>R.O Date </CENTER></TD>
<TD width="10%">
<CENTER>R.O Number </CENTER></TD>
<TD width="5%">
<CENTER>Type </CENTER></TD>
<TD width="60%">
<CENTER>Labor Operation </CENTER></TD>
<TD width="15%">
<CENTER>Odometer Reading </CENTER></TD></TR>
<TR>
<TD width="10%">
<CENTER>03/30/2004 </CENTER></TD>
<TD width="10%">
<CENTER>144164 </CENTER></TD>
<TD width="5%">
<CENTER># </CENTER></TD>
<TD width="60%">C3122 - HEADLINING ASSEMBLY - FRONT - R&amp;R OR REPLACE </TD>
<TD align=right width="15%">3243 miles </TD></TR>
<TR>
<TD width="10%">
<CENTER>01/21/2004 </CENTER></TD>
<TD width="10%">
<CENTER>A52078 </CENTER></TD>
<TD width="5%">
<CENTER>I </CENTER></TD>
<TD width="60%">Z7000 - PRE-DELIVERY INSPECTION - BASE TIME </TD>
<TD align=right width="15%">0 miles </TD></TR></T></TABLE>
TCosgrove
06-26-2004, 10:39 PM
GMCSID


Thanks http://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gifYou are the man.http://www.dieselplace.com/forum/smileys/Big Smile.gif





Cosgrovehttp://www.dieselplace.com/forum/smileys/HiHi.gif
Terms of Use