Intermediate shaft [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums

: Intermediate shaft


Cheesehead
10-04-2006, 10:24 AM
Has anyone used the NEW designed shaft from Merchant and if so hows it holding up..Dealer replaced mine @ 21,400 miles. 38,450 and its back. I know of the grease kit but, wanting a permenant fix.

towdog333
10-04-2006, 12:18 PM
Sometimes it's not always the I.S. that causes your steering problems. They replaced my shaft twice didn't fix the problem, they replaced the lower steering shaft bearing and bingo fixed;)

Cheesehead
10-04-2006, 01:06 PM
Well I had it replaced under warranty, but now it is out. whats the chances of them still covering their warr work?:confused:

Zick
10-04-2006, 01:39 PM
Well I had it replaced under warranty, but now it is out. whats the chances of them still covering their warr work?:confused:

Same thing happened on my 03'. They said the parts carried a year warranty on them. Of course when I checked it had been just over a year. :(
Bought the lube kit for $15 and its fixed for now.

towdog333
10-04-2006, 01:41 PM
Well I had it replaced under warranty, but now it is out. whats the chances of them still covering their warr work?:confused:
If your still under warranty they should cover it. Make them check the whole steering mechanism to see if it isn't something else causing your problems.

Cheesehead
10-11-2006, 07:31 AM
Well went to the dealer yesterday, The told me about the latest and greatest grease and would re-lube the previously new int shaft. Upon picking the truck up I read the bill, It stated the prior person that installed the new shaft a year ago overtorqued the nut and the shaft was not re-greaseable. So they installed a new shaft with the new fangled grease. All looks good huh.
WELL I got 4 miles from work this a.m (5:30) and I lost power steering and brakes. Milked it into the parking lot scared ****less. Lifted the hood up and to what did I see. A frikin power steering line blown off.. Now a little advise please, Is the pump, or steering box shot. And should I insist they replace ???HELP