IM LOOKING AT BUYING A HIGH MILEAGED D/A. BUT, IM NOT CONVIENCED THAT IT HAS THE ACTUAL MILES ON IT. IS THERE ANY WAY TO LOOK INTO THE COMPUTER/ECM AND SEE WHAT THE ACTUAL MILEAGE IS???

You can look in the cluster data and get the mileage that way, but if it was overridden it may show what the odo shows.


Eric

Check the hours. Figure out what average miles/hour are. If it is under around 30 miles per hour I would be leary.


From what I understand there are other ways to compare milage with the odometer, although I have yet to see it be done.

IM NOT CLEAR=====WHAT IS THE CLUSTER DATA??? IS THERE A PLACE IN THE ECM TO LOOK OTHER THAN WHAT THE ODOMETER SHOWS FOR THE MILES???

Yes with a Tech II ......
Like mentioned "hours" cannot be over ridden ..... If you don't have access to a Tech II bring it to the dealer .....

We know what this is really about you sly dog !!!!!


Mac http://www.dieselplace.com/forum/smileys/Embarrased.gif http://www.dieselplace.com/forum/smileys/Embarrased.gif http://www.dieselplace.com/forum/smileys/Embarrased.gif

LOL @ Mac. I just checked mine and after 8717 miles I am at 289 hours. That's just a hair over 30 miles per hour. I guess I am an old grandma??? http://www.dieselplace.com/forum/smileys/Angry.gif I do Lots of short trips and also have a remote start. I would say this is one of the lower ones you will see. Edited by: Max Power

Nope! I'm at 25.xx. I can give you a spreadsheet of every tank, miles and hours. I range from 10 (in the shop) up to 60 on different tanks, but lifetime bounces between 25 adn 26. http://www.dieselplace.com/forum/smileys/Cry.gif I guess I need to get a SMACK DOWN bumper to get to and from work to improve my MPH. http://www.dieselplace.com/forum/smileys/Clap.gif

After 29,000 miles I'm at 37.2. What would freud say about me after learning that?