Guys,


Like most of you I haven't been happy with the viewing angle of my Attitude in the overhead mount. So with a little solid modeling I propose the follwing design. This one would require removing the Attitude from it's front cover and inserting it into the billet front cover pictured here. The attraction is, it is all uniform across the front. No transition from aluminum to plastic. I can also cut out the inside to insert the entire Attitude just as we do now. Obviously the blank area is for switches I just haven't drawn them yet. Before I cut some prototypes I welcome your comments, criticisms, and concerns.


http://www.dieselplace.com/forum/uploads/Bezel_-_Edge_Control_Unit1.jpg


http://www.dieselplace.com/forum/uploads/Bezel_-_Edge_Control_Unit2.jpg


http://www.dieselplace.com/forum/uploads/Bezel_-_Edge_Control_Unit3.jpg

That is pretty cool. I'd order one!

Very nice! My only concern is that it MIGHT look a little funny. I'd have to see it to know for sure. The other concern I have is that it might not be enough of an angle. I wish there was a way to make it fit in the overhead console a little better too.


Keep it the way you show it here. It would look a lot better then using the front 1/2 of the attitude IMO.



Keep up the good work! http://www.dieselplace.com/forum/smileys/Clap.gifEdited by: Max Power

I really am interested in any changes you guys might like to see. If we design it together I just might get it right. I might be able to do some protoypes next week. I thought about recessing it into the console as well, but I just couldn't get it to look right.

Id buy one for sure! Email me about testing, Ill give you the cash for the materials!

With your current design, what would hold
the "display guts" onto the mount? Would the stock
back & screws still be used by just adding
some screwholes to your new mount?

I think I like it, but I would also like
to see it installed in a console too....
Good job!

Thanks for any insight,

T.Edited by: Terry

Trippin,


Great idea if you could color match, otherwise I think the aluminum looks better. Color matching with a different texture is going to be tough since even the same color won't look like a match...


One other thought, how about if it were canted down a little?


I'm just thinking about what it takes to visualize it while driving since I've been testing, and it seems like if it were angled down a little as well, it would be easier to see.

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNABLE="on">
<T>
<TR height="100%" width="100%" UNABLE="on">
<TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNABLE="off">


Trippin.


Love the design, only thing I could add would be to not only put the angle towards the driver how about also tilting it down somewhat to make it a little easier to read from the drivers seat. Keep up the good work, and I would also be interested in buying one if you get it going.


Paul http://www.dieselplace.com/forum/smileys/Thumbs Up.gifhttp://dieselplace.com/forum/smileys/Clap.gif</TD></TR>
<TR hb_tag="1" UNABLE="on">
<TD style="FONT-SIZE: 1pt" height=1 UNABLE="on">
<DIV id=hotbar_promo></DIV></TD></TR></T></TABLE>

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNABLE="on">
<T>
<TR height="100%" width="100%" UNABLE="on">
<TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNABLE="off">


Zeeb


You beat me with the same idea by 5 minutes, just shows that great minds think alike........


If I hadn't proof read my post we would have been at the same time. You are always one step ahead of me.http://www.dieselplace.com/forum/smileys/Ermm.gif


Paul</TD></TR>
<TR hb_tag="1" UNABLE="on">
<TD style="FONT-SIZE: 1pt" height=1 UNABLE="on">
<DIV id=hotbar_promo></DIV></TD></TR></T></TABLE>

With your current design, what would hold
the "display guts" onto the mount? Would the stock
back &amp; screws still be used by just adding
some screwholes to your new mount?

I think I like it, but I would also like
to see it installed in a console too....
Good job!

Thanks for any insight,

T.


Terry, I haven't drawn the screw holes. But it is designed to do exactly what you asked.


I'll work on the downward angle, its no problem! Keep the ideas coming.Edited by: Trippin

We need something cool to fill in the blank spot on the left. http://www.dieselplace.com/forum/smileys/Cool.gif

We need something cool to fill in the blank spot on the left. http://www.dieselplace.com/forum/smileys/Cool.gif


Besides auxillary switches? Engraving?

Nothing specific in mind. There is lots you could do but nothing that everyone will like.

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNABLE="on">
<T>
<TR height="100%" width="100%" UNABLE="on">
<TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNABLE="off">Anyway to put a cover over the attitude so the Stealers couldn't tell what it is?</TD></TR>
<TR hb_tag="1" UNABLE="on">
<TD style="FONT-SIZE: 1pt" height=1 UNABLE="on">
<DIV id=hotbar_promo></DIV></TD></TR></T></TABLE>

We need something cool to fill in the blank spot on the left. http://www.dieselplace.com/forum/smileys/Cool.gif





Genuine EATON lockout switch to arm the NOS!

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNABLE="on"><T>
<T>
<TR height="100%" width="100%" UNABLE="on">
<TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNABLE="off">


Anyway to put a cover over the attitude so the Stealers couldn't tell what it is?


I'm working on something for that. I've got an EGT guage and had a local trophy shop cut a piece of 1/4" thick black lexan with a hole in the middle.


I've run the wires for the EGT guage, but they're a bit short. Haven't got that one figured out yet, but the ATS mount could be removed and just lay in behind the lexan piece with the gauge. It's a bit big for the hole right now, but I'll get a pic when I get it fitted.


As for the blank space, a trophy shop could always do a monogram or something?





</TD></TR>
<TR UNABLE="on" hb_tag="1">
<TD style="FONT-SIZE: 1pt" height=1 UNABLE="on">
<DIV id=hotbar_promo> </DIV></TD></TR></T></T></TABLE>

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNABLE="on">
<T>
<TR height="100%" width="100%" UNABLE="on">
<TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNABLE="off">I think the blank space would be just perfect for a barrel lock on the hiding cover so they (The Dealers) wouldn't be tempted to try and remove the cover. It to could be engraved with GMC, or Chevy or any other logo for the truck you own. Or any design. I think Trippin has realy hit on something here</TD></TR>
<TR hb_tag="1" UNABLE="on">
<TD style="FONT-SIZE: 1pt" height=1 UNABLE="on">
<DIV id=hotbar_promo></DIV></TD></TR></T></TABLE>

I would buy one too! Great work. I agree with the other comments about the downward angle, and possibly a greater outward angle, but for that we won't really know until it's made and used.


Bill

I would toss my ATS mount for that!


I like the idea of a powdercoat color match or even anodized colors but the aluminum look is fine too. (You could have a Chrome option for the Bling blingin' members!) http://www.dieselplace.com/forum/smileys/Clown.gif


I would like to see an option for the blank area; either Blank, a button or two, or engraved.


Personally, I dont like the 'ATS' engraved on my mount. I would prefer just plain blank.


I like the idea of a very slight downward tilt, but not too much ~might start looking funky.


Great Job!http://www.dieselplace.com/forum/smileys/Clap.gif

Duramax logo engraved? It's the one thing we all have in common. http://www.dieselplace.com/forum/smileys/Cool.gif

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNABLE="on">
<T>
<TR height="100%" width="100%" UNABLE="on">
<TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNABLE="off">


Trippin


I just thought of something, what happens to our warranty when we remove the date and version sticker on the side of the attitude to mount it in the new face plate. Might want to check with "Edge" to see if we can move, or just remove it and maybe place it on the back of the unit. I have worried about placing the velcro on the side of it to place it on my dash. Just a thought.


Paul</TD></TR>
<TR hb_tag="1" UNABLE="on">
<TD style="FONT-SIZE: 1pt" height=1 UNABLE="on">
<DIV id=hotbar_promo></DIV></TD></TR></T></TABLE>

Paul,


I asked Edge about splitting the case on the Attitude to get it into the ATS mount and the warranty label.


They said "no problem" and in fact, placed the new sticker on the back of the Attitude after it was re-flashed the other day.

I am in for one. A little more angle towards the driver and maybe a little downward would be ideal but this is a huge improvement

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNABLE="on">
<T>
<TR height="100%" width="100%" UNABLE="on">
<TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNABLE="off">


Thanks Zeeb, it's always good to get all the "Angles" so to speak worked out before we go and screw something up.


http://www.dieselplace.com/forum/smileys/Big Smile.gifhttp://www.dieselplace.com/forum/smileys/Big Smile.gifhttp://dieselplace.com/forum/smileys/Big%20Smile.gif Paulhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gif</TD></TR>
<TR hb_tag="1" UNABLE="on">
<TD style="FONT-SIZE: 1pt" height=1 UNABLE="on">
<DIV id=hotbar_promo></DIV></TD></TR></T></TABLE>

This looks excellent!
I have an Edge Juice /w Attitude coming soon and have been wondering how to mount the Attitude. I've been looking for some further information on the ATS mount, but came up short. Your idea looks like a better solution than the ATS mounting plate, and I am certainly interested.

Do you have any ballpark numbers on what you'll price it at?

Thanks!
HBruns

Much better than the ATS! Would you also make one the fit the 2004 overhead short console? It has a different opening from the earlier ones. I'd buy one in a heartbeat! Right now mine is basically in the "Edge location" with double sided tape. Not too bad there but that mount would be sweet!

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNABLE="on">
<T>
<TR height="100%" UNABLE="on" width="100%">
<TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNABLE="off">


Trippin


Now that you have us all chomping at the bit, well...............Need to see the new design or any new ideas you have come up with. Going through withdrawals, HELPhttp://www.dieselplace.com/forum/smileys/Cry.gif


Paul</TD></TR>
<TR UNABLE="on" hb_tag="1">
<TD style="FONT-SIZE: 1pt" height=1 UNABLE="on">
<DIV id=hotbar_promo></DIV></TD></TR></T></TABLE>

Paul,


The response has been great! I'm using everbody's input to improve the design. The downward angle is easy to draw, but a little more difficult to manufacture. Aren't the 03 and 04 consoles the same? The 01s and 02s different. I've got lots of family stuff going on this weekend, but I hope to make some chips next week. Gotta build a fixture to hold them then the I can build the parts themselves. I should have an idea on pricing at the end of next week. I'll keep you all informed. Thanks for all the great ideas, keep em coming!

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNABLE="on">
<T>
<TR height="100%" UNABLE="on" width="100%">
<TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNABLE="off">


Can't wait, almost as excited over this as I was in getting the Juice/Attitude. I understand about family stuff, am here in Colorado visiting my son, made a believer out of him on the Duramax/Allisonhttp://www.dieselplace.com/forum/smileys/Approve.gif


Thanks for the input, have a great day.


Paul</TD></TR>
<TR UNABLE="on" hb_tag="1">
<TD style="FONT-SIZE: 1pt" height=1 UNABLE="on">
<DIV id=hotbar_promo></DIV></TD></TR></T></TABLE>

I think the '01 and '02 with the full over head console are already at a downward angle and the above drawings would work fine. The '03 and '04 are at less of an angle and would benefit from a little adjustment......looks like 2 different ones will have to be made. http://www.dieselplace.com/forum/smileys/Embarrased.gif





Now if you could only get Edge to display boost to about 50lbs. we would be set.....I like to plan ahead.


Edited by: BIG DIPPER

Trippin,


I'd also be interested in one of these.http://www.dieselplace.com/forum/smileys/Big Smile.gif

Trippin


I'm in for one.I just installed a homelink overhead in mine this week. so I could loan you the factory one if it would help to make things easier. PM me if you need it.


Brian

Not only will I take one, in any design ya'll come up with, but I'd float you the money in advance (+ whatever it takes) to complete R&amp;D. Fantastic job, Trippin, but I hope you're ready to mass produce. This'll be the hot ticket on ALL the upgraded trucks, guaranteed. That being said, a "dealer lock-out" would be cool, but this being the cool item for all, it'll be just a few weeks before they figure out what the locked cover is for, then it's the same old... I haven't seen one yet, but is anyone elses box (like ATS's tranny box) small enough to fit in the blank space? Keep up the great work!!!! (BTW, CNC's rock, yes? http://www.dieselplace.com/forum/smileys/Clap.gif )...T

what program was it modeled in? any way you could shoot me a file?

Very nice looking housing for the Attitude. I would also like one...please keep us informed of the progress.

Not only will I take one, in any design ya'll come up with, but I'd float you the money in advance (+ whatever it takes) to complete R&amp;D. Fantastic job, Trippin, but I hope you're ready to mass produce. This'll be the hot ticket on ALL the upgraded trucks, guaranteed. That being said, a "dealer lock-out" would be cool, but this being the cool item for all, it'll be just a few weeks before they figure out what the locked cover is for, then it's the same old... I haven't seen one yet, but is anyone elses box (like ATS's tranny box) small enough to fit in the blank space? Keep up the great work!!!! (BTW, CNC's rock, yes? http://www.dieselplace.com/forum/smileys/Clap.gif )...T


Thanks for the offer. I got it covered for now. I'll put you on the list for the first batch.

what program was it modeled in? any way you could shoot me a file?


Solidworks.


Shooting you the file is kinda like giving away the design. What did you have in mind?

Sweet.......Everone else summed up MY thoughts. I would get one also.





http://www.dieselplace.com/forum/smileys/Rock On.gif (he is cool!)

I would also be interested in one . It would be cool to be able to have them anodized. Powder coating would present a fitment problem. I would definitely go for a black on.

Trippin,


I'm in. Dealer lockout would be simply priceless!!!!!!!!!!!!! Please put me down for the first run.


Mark

Hey guys,


Just a quick update. This week has gotten away from me so I'm going to try and get the fixtures built this weekend and cut some prototypes. Hopefully have some installed pictures next week. Thanks for your patience. http://www.dieselplace.com/forum/smileys/Big Smile.gif

No problem....Take your time to do it right!http://www.dieselplace.com/forum/smileys/Rock On.gif

Hey Trippin, what's the good word? I can see you've been busy, and the holiday is upon us now, so maybe prototypes next week sometime? Thanks bud, and great work...T

Pretty tough to claim how busy I've been, when I took a night off to go racing. But racing gets me pumped up and enthused about working the long hours to get this stuff done. Fixtures are done. And long weekends are perfect for cutting prototypes.


Sorry for the delay guys, I know your all anxious! Don't lose faith in me yet. http://www.dieselplace.com/forum/smileys/Cool.gif

I have been Looking for A good mount. This seems to be the coolest yet. Put me down for one. Then I can throw away the Wallyworld cellphone holder turned horizontaly that is sticking out of my cig lighter.http://www.dieselplace.com/forum/smileys/Clap.gif My 04 would need some downward angle. Trippin, Your'e the Stuff

Trippin you are simply amazing....he you should sell it in a combo package with the attitude so I can get both at the some time!!! http://www.dieselplace.com/forum/smileys/HiHi.gif

Great idea! Are you using Pro-E?

Great idea! Are you using Pro-E?


Solidworks and Surfcam.

Count me in too. Great look'n design. Do you need any $$ up front for a deposit.


Rich.http://www.dieselplace.com/forum/smileys/Clap.gif

Trippin,


Great idea and it looks great! http://www.dieselplace.com/forum/smileys/Thumbs Up.gif I would definitely be interested in one of these.

Trippin


Any time frame on the new design, no rush just wondering...........http://www.dieselplace.com/forum/smileys/Geek.gif

Xcellent! Most needed for Attitude display. Please add me to the expanding list of requests.......

Im interested too.Any idea of price and when will be available

O.K. guys, the downward tilt has made things a little more difficult. We're getting there, just not as quickly as I had hoped. I asked and you guys responded, I think it is a great idea so stick with me while I work out the kinks.


More info by the weekend.http://www.dieselplace.com/forum/smileys/Embarrased.gif


I won't know pricing until we run a few, but the price goes down as the run quantity goes up. So if your remotely interested let me know so I can include you in the count. Thanks for your patience!

I won't know pricing until we run a few, but the price goes down as the run quantity goes up. So if your remotely interested let me know so I can include you in the count. Thanks for your patience!

Ok, I'm interested too. Thanks for the info!

T.

count me in as well

I am interested also, may require 2 if my brother gets his soon.....

I'm in.

I will take one.

Ive said it before, I think. As soon as their done Ill order one. Hell ill test it and pay the price for it also ;)

Trippin,


I would like one also.


Thanks

Count Me In





Bill

Sweet Design. Nice Job trippin count me in

nice job.count me in as well

Count me in. My father in law might want one too. We'll see who's performance box he goes with first.

if i go with the edge i will want one also

trippin,


Any luck with the final design?


How exactly are you taking requests?


I would like one.


I think I would leave the blank spot blank. Many people have different needs and they can always modify it to fit them.

Me 2....Me 2......lol......it is getting old canting the ATS mount out on the passenger side....and I agree with akdeisel on the blank spot ...I only use 1 switch(wired into my garage door opener).http://www.dieselplace.com/forum/smileys/Geek.gif

I want to say that Trippin is working away on these but I interrupted him for a little help on one of my projects so I put him a few weeks behind. I can say by looking at the tooling and a few of the check parts it will be worth the wait!

Can't wait to see what he has come up with!!!http://www.dieselplace.com/forum/smileys/Cry.gif

Count me in.

ill have to have one of those.

Trippin,


I'd LOVE one! I've been reading this board for months now taking in all the great info but this is my first post. Just ordered Edge/Attitude today with Banks cat-back and AFE Pro-Guard 7 Stage 1 for my LLY.





THANKS!


2004.5 Carbon Crew D/A LLY 4x4

Working late tonight on the first version. Hopefully pictures tomorrow. I'm sorry it's taken so long, I'm easily distracted. http://www.dieselplace.com/forum/smileys/Embarrased.gif

http://www.dieselplace.com/forum/uploads/91E_kisses.gif

easily distractedhttp://www.dieselplace.com/forum/smileys/HiHi.gif put me in for 5

http://www.dieselplace.com/forum/uploads/91E_kisses.gif

easily distractedhttp://www.dieselplace.com/forum/smileys/HiHi.gif put me in for 5


OH my god! http://www.dieselplace.com/forum/smileys/Clap.gif

I would buy one too! Great work. Count me in!

count me in!!

http://www.dieselplace.com/forum/uploads/91E_kisses.gif

easily distractedhttp://www.dieselplace.com/forum/smileys/HiHi.gif put me in for 5





OMG, How I love this website!! http://www.dieselplace.com/forum/smileys/Big Smile.gif

Haven't got juiced yet but I will be so include me.

http://www.dieselplace.com/forum/uploads/91E_kisses.gif




Were did she go after the kiss?http://www.dieselplace.com/forum/smileys/HiHi.gifhttp://www.dieselplace.com/forum/smileys/HiHi.gifhttp://www.dieselplace.com/forum/smileys/HiHi.gifhttp://www.dieselplace.com/forum/smileys/HiHi.gif


She is hot!!!And man those lips!!!http://www.dieselplace.com/forum/smileys/HiHi.gifhttp://www.dieselplace.com/forum/smileys/HiHi.gifhttp://www.dieselplace.com/forum/smileys/HiHi.gifhttp://www.dieselplace.com/forum/smileys/HiHi.gif


I need to get out more.http://www.dieselplace.com/forum/smileys/HiHi.gif

Swingggggggggg!!!!!!http://www.dieselplace.com/forum/smileys/Clap.gif

Guy


Can I come over and help tonight? You will need me to distract the distractress. http://www.dieselplace.com/forum/smileys/Hug.gif http://www.dieselplace.com/forum/smileys/Rock On.gif http://www.dieselplace.com/forum/smileys/HiHi.gif


mike

Trippin


Any luck in incorporating a dealer lock out cover in your new designhttp://www.dieselplace.com/forum/smileys/Big Smile.gif

I may not be any good, but I'm slow.


Here are some progress pics of the part roughed out, I'm starting to sound like a broken record with my almost done routine, but I 've been pulled in many different directions these last few weeks, it's incredible.http://www.dieselplace.com/forum/smileys/Shocked.gif It's good to be wanted. Of course the first part is the hardest and takes the longest.


http://www.dieselplace.com/forum/uploads/D77_att2.JPG


Harley, I haven't done anything about the lock yet as I wanted to get the base model done and to the guys who just want the generic version. Then we can look at some variations, maybe some personalized mounts. http://www.dieselplace.com/forum/smileys/Cool.gifEdited by: Trippin

Wow, that looks great. Even better than I thought it would looking at the CAD you did. Nice work.


Dennis

Beautiful, just beautiful. You have made all the waiting worthwhile. It's really going to add to the looks of the inside of my truck, great job Trippinhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gif

Trippin is it angled downward at all?

That mount looks greeeaat! I'm in for one, whenever finished!

Trippin is it angled downward at all?


I've had requests for 4 different types. And will build all four.


1) Downward with plastic Attitude inserted in.
2) Downward with Attitude guts into billet mount.
3) Just angled with plastic Attitude inserted in.
4) Just angled with Attitude guts inserted in.


This pictured one is "Just angled, ready to press in the plastic Attitude.

Trippin, you're never one to disappoint. http://www.dieselplace.com/forum/smileys/Clap.gif


I'm gonna have to see some pictures before I decide. I'm leaning towards your original design. Angled with attitude guts insert.

Trippin, you're never one to disappoint. http://www.dieselplace.com/forum/smileys/Clap.gif


I'm gonna have to see some pictures before I decide. I'm leaning towards your original design. Angled with attitude guts insert.





I'm also thinking of offering a "drive-up" Attitude mount window service....kinda like Burger King.


Have it your way!http://www.dieselplace.com/forum/smileys/HiHi.gif

Trippin let me know when you have the mount completed and in your truck I would like to check it out if you don't mind.

If I juice, which seems likely, I will probably be interested in one of these, dependant on price and seeing some final pics.

Looks great!

Marc

That’s going to be an expensive billet piece let me know if you want to build a mold and make plastic molded parts I own a large mold shop in Ca. Once the mold is built the parts are very cheap to mold let me know. I can also help out with <st1:place w:st="on">SLA</st1:place> prototypes I can have parts made in a day.


Shaydog

Hey Trippin',


Any more news on this? I am liking the personalize idea. http://www.dieselplace.com/forum/smileys/HiHi.gif

Thanks Shadydog, I'll keep that in mind. Could you PM me with your name and #, I'd like to know more about your mold shop for some other stuff I'm working on.

Hey Trippin',


Any more news on this? I am liking the personalize idea. http://www.dieselplace.com/forum/smileys/HiHi.gif





I haven't had time to run the finish cut yet so the last pictures are pretty much where we stand. Trying to balance the work and family thing. Not to sound like a broken record but maybe finish up and some new pics Friday.

Will you have a mount for the '02 model trucks?


Adam

Will you have a mount for the '02 model trucks?


Adam








Absolutely.

What's the good word on this setup?

Trippin is out doing the family thing for the next few weeks. If anyones out running around Lake Powell you might run across his family taking ownership of him for awhile.

Hope he has fun http://www.dieselplace.com/forum/smileys/Clap.gif


I will be interested as it it is tilted enough for my tri-focals to see the screen . . . http://www.dieselplace.com/forum/smileys/Big Smile.gif

Trippin, NICE WORK. Looks great. I want one, put me on the list!

Guys,


I just got back from a week away at Lake Powell. Here are the pics I promised.


I've got one week back home and then another trip next week. (I had to work around the kids summer schedule)


Production on this version will begin as soon as I get back. Next will be the full billet front where you will insert your Attitude guts into the mount itself. Then the combination angled versions. Pricing? Oh yeah I gotta work on that too!


http://www.dieselplace.com/forum/uploads/C43_DSC016332.JPG


http://www.dieselplace.com/forum/uploads/1C9_DSC016342.JPGEdited by: Trippin

Sweet!!! Ok, does this mean the wait is over???http://www.dieselplace.com/forum/smileys/Clap.gif

Glad I finally looked at this thread...


Trippin, that is simply excellent work! </v:stroke></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:ulas></v:path><o:lock aspectratio="t" v:ext="edit"></o:lock></v:shape></v:imagedata></v:shape>


I'm interested. I can see one with a downward tilt, a solid installation of the mount to avoid rattles and to frustrate the attempts of nosy people (a lock is not necessary because the removal of the entire overhead console is way too simple), and the ability to install, perhaps lighted, micro-toggled switches of my own choice! I like the natural finish---no logos or labels for me...I peeled that stuff off of the truck when I brought it home...don't want it on the inside if I can help it. Something like "Trippin Products" would certainly be acceptable to give the man credit---put it on the side of the unit where it's angled out.


Does Mr. Trippin have a website? He should get more involved in e-commerce with these great ideas!Cool. </v:imagedata></v:shape>

Can't wait to see what one looks like mounted in a truck

Very,very,nice!!http://www.dieselplace.com/forum/smileys/Clap.gif

I like it. keep us updated

what holds it in?

Smooooooooth! Man, that's a Tripp!

Friction should hold it in like the ATS model.


Trippin,


Could you take pictures of it in place at a view from eye level with the attitude on. I know its asking for a lot, but you have done a great job and I can't figure out why ATS did not come out with this idea when they started working on the first mount.

Guys, here are some pictures with the mount installed in my 03. The first is from the driver's point of view. I typically drive with my seat almost all the way forward so my smurf like legs can reach the pedals. I took this picture holding the camera in front of my face and then rotating my head to see the monitor. I used to have to lean into the center of the truck to see the monitor display. Of course the most important picture became pixelated when I reduced it for uploading. High res pics at the link in my sig.


The second picture is just from the center of the truck between the two front seats.


The last is from the passengers view.


I'm a little worried about the protrusion out away from the console and am considering a redesign. But beauty is in the eye of the beholder. I will make them this way for any that have to have them right now,(Read Harley 99) http://www.dieselplace.com/forum/smileys/HiHi.gif. Any way you guys are my friends and my critics. So let me know.


http://www.dieselplace.com/forum/uploads/CCZ_109_09683.JPG


http://www.dieselplace.com/forum/uploads/1Z2_109_09702.JPG


http://www.dieselplace.com/forum/uploads/FD8_109_09712.JPGEdited by: Trippin

To be honest, I like the looks of the ATS ones better. But this is all about function. Yours is definately a way better viewing angle. I look forward to getting one.

Can you recess the whole thing? i know the button would be a reach... but the view might be better?


Burner

The recess can only go back a little bit before we run into the console, but that was my thought exactly, pushing it back as far as it can go on the next one. http://www.dieselplace.com/forum/smileys/Cry.gif

Remember the Burb pic? How much would one of those cost? I don't think they are too much... I don't think. Eric could tell us. If we had that console and your mount, it would most likely be perfect!

What about the one with the aluminum from instead of the edge front? I expected you to make that one first. I guess it would be easy to add switches similar to ats'?

Trippin


It looks good, but I think I will have to wait until you design one with the locking cover. Once I install it I don't want to have to do all that uninstalling to take it out for a trip to the dealer. So I guess my sig will have to remain the same for now!!!http://www.dieselplace.com/forum/smileys/HiHi.gif

What about the one with the aluminum from instead of the edge front? I expected you to make that one first. I guess it would be easy to add switches similar to ats'?


That one is next, but more complicated machining on the back side. I wanted to get this one right first.


Burner, you meant use the Burb console and then this mount? Can you post the burb pic? I know you sent it to me but you can save me the time of serching for it. I wonder if your Burb console is more like the 01's and 02's?

I assume he is talkng about the console that is similar to the 01 and 02's. As far as I know those are the only 2 styles of consoles GM has used in full size trucks.

I never saved them....... just poped'em onto a RW CD and chunked them your way...... they're never more. I guess I could break a sweat and walk out... get the camera.. open the wifes Burb and snap a few.


Sheeeesh........... well, ok. I'l give it a try. http://www.dieselplace.com/forum/smileys/Embarrased.gif

camera is dead...... sorry about that. I'll try in the morning with good a battery.

Allright, I went and found them.


http://www.dieselplace.com/forum/uploads/1B8_Burb1.JPG


http://www.dieselplace.com/forum/uploads/322_burb2.JPG


http://www.dieselplace.com/forum/uploads/B3E_burb3.JPG

What a gainer. That's what i'd call a fast nac nac.

Max, We have yet to have sunroofs in our trucks. Yes, I know the 05's have them... still havn't seen it. This console looks as if it would cover about the same area without all the overhang ours does now. This postion is set further back and would give us a little better view of the monitor without as much eye strain. Once the aluminmumunmmm thing is in place... the rest is unuseable. I thought it would be nice to have it made for this console because it would make better use of the space as well as adding function with the home-link buttons. I don't think the thing is all that expensive... I don't think.


There again, only folks that know GM would see the difference.... that would be us. Stock trick parts is a must! http://www.dieselplace.com/forum/smileys/Big Smile.gif





Oh yeah BTW----- Guy, I like what you've done. I can't wait to see what's next!

I've seen that console 1000 times on ebay and I always thought it was the same as ours. The pictures here show that it is different. Interesting. You learn something new every day. http://www.dieselplace.com/forum/smileys/Big Smile.gif

Nice Job, Trippin. I also think by the pictures about maybe recessing it for it might help on the more of a straight on view of it. Looks good right now too.

Trippin: You might like the look better if it were anodized or painted a medium to dark gray. This may give a more finished appearance and less of a raw alum. look. Might also consider putting some groves or stair stepping the left side to reduce the bulk look that you mentioned. Another possibility is to angle the passenger side edge some more. Glad you have CAD software.

Keep on trucking, it is looking good!

Great design! I'll be scrapping my ATS as soon as yours are available.http://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Big Smile.gif





Jay

Just a thought, but would it be possible to move the monitor all the way to the left but angle it the same way? Then the right side would be the flat aluminum piece. This way you could angle the monitor even more, and the right end piece would look blocked off. The look would make it seem like the monitor was in its own little case that you just slid in to the console, plus it would put the controls a little closer to the driver.


http://dieselplace.com/forum/uploads/CCZ_109_09683.JPG


Edited by: HD4fun

Having the monitor or Attitude on the far side, the way it is now, is much better. Also, the blank could be used for "Tripp" switches or maybe even a digital guage. Basicly if you move it closer it relegates the possiblity of using it for anything else. It also appears to be user friendly. Having a way to support one finger while using the other to change settings. It's readly accessable even if you're not looking at it......http://www.dieselplace.com/forum/smileys/Approve.gif

Some of us are left handed......I'm pretty much useless with the right but to steer the truck and click the volume controls on the steering wheel. I was picturing myself actually leaning over to hit the buttons. Good luck getting any of my right hand fingers to steady on those buttons.http://www.dieselplace.com/forum/smileys/Cry.gif

That was exactly my point. The open face gives you a spot to rest your fingers on while you feel around. I'm at a loss for words........... It's like using a gun rest, it keeps you steady. http://www.dieselplace.com/forum/smileys/Thumbs Up.gif

Slightly off topic stupid question- What's the little black doohickey on the left edge of the console in this pic? Seen several in various pics. Looks like a little remote control or something. Being Trippin's, maybe missile launch and passenger eject buttons? http://www.dieselplace.com/forum/smileys/HiHi.gif


http://dieselplace.com/forum/uploads/CCZ_109_09683.JPG

Microphone for onstar.

Thx. Always thought that was in the mirror, too. I was too cheap to go LT...

jonb,


That's a great question. Read this thread, I thought it was pretty funny.


Dennis


http://www.dieselplace.com/forum/forum_posts.asp?TID=8659&amp;KW=homelink+for

Trippin,


That Attitude mount is awsome! Great job. I also like the idea of recessing it back as far as possible so it doesn't look "clunky" hangin out there on the fat side. Holy crap dude! I am eagerly waiting for your next prototype w/downward angle. Some might consider this a bit nit picky, but in looking at the photos, you might want to incorperate a small curve that runs along the front of the console. I know it adds complexity (surfacing on an nc or tilting the head with a flycutter on a manual machine, but it would look really good.


Bill

maybe if there are some elect.gurus out there, it might be possible to make it like a removeable cd player ,just remove it so sticky fingers wont take it. carry it like a cell phone when your away from your truck

nlvcc, not a bad Idea but... If you do make a connection behind the mount and take the attitude with you.....what happens? Does the truck remain in Level 4 or revert back to Level 1? I think it stays in the last setting, unless 5 is used and then it would go to 4...I think. I would freak out if someone had my truck @ Level 4 and no "backdown" feature working......http://www.dieselplace.com/forum/smileys/Shocked.gif

There has been one of these overhead console mounts available for several months now. Very similar - Check with your local edge dealer. I will get a picture in the morning Edited by: bar836

burner,


dont know the ins n outs on the default settings but you may be right on both accounts only the EDGE would knowhttp://www.dieselplace.com/forum/smileys/HiHi.gif

Applause to innovationhttp://www.dieselplace.com/forum/smileys/Clap.gif Love it. Definate improvement to ATS.


I'd love switches that are momentary-on, momentary-off for airbag inflation/deflation. Perhaps they could be found at Digi-key.

Trippin,

I read a post on another thread that the ATS mount became very hot. Maybe slots on the top and bottom would allow for natural convection cooling.