kimagine
09-14-2006, 09:38 PM
Good evening guys,
I have what I hope would be a simple question, what are the differences in the 6.5 motor? I mean the lower end. I understand that the difference between the pre 93's and post 93's are the mechanical and electronic injection pumps. If one were to find a 95 or 96 6.5 for next to nothing and needed to swap out motors with a 93, what would need to be different, if anything?
Thanks in advance.
Mark
http://www.dieselplace.com/forum/showthread.php?t=101912
read this thread this might help
kimagine
09-14-2006, 10:00 PM
Thanks Rex,
I'll check out the link asap. For some reason my comp is working slow right now:mad: .
One of these days, I'm gonna still come up there and visit ya.;)
Mark
kimagine
09-14-2006, 10:06 PM
Rex,
Got it!
That sounds good and thanks for the link.:ro)
It made sense and can now follow through with any possible endeavors.
Mark
stop on by anytime....parts are dirt cheap...and theres lots of beer here
qwomack
09-14-2006, 10:27 PM
stop on by anytime....parts are dirt cheap...and theres lots of beer here
Looks like an open invite to me. :)
Looks like an open invite to me. :)
sure is every one is welcome... i have a endless supply of booze and theres some skanks that live down the road that love to party...:muahaha:
kimagine
09-21-2006, 11:02 PM
Rex,
You have a PM and when there are dirt cheap parts and BEER, that just means I have to get to work!!!!!!!!;)
Mark
hddamage
09-22-2006, 01:15 AM
im not one to let a good skank go to waste:D
endless beer and cheap parts too ... hmm sounds like a trap... i would be very carefull up there.;)
kimagine
09-22-2006, 06:25 PM
im not one to let a good skank go to waste:D
endless beer and cheap parts too ... hmm sounds like a trap... i would be very carefull up there.;)
Careful,,,,,:confused: :confused: :rolleyes: , I'll get right on that!:eek: ;) :grd:
Mark:ro)
hddamage
09-22-2006, 07:03 PM
cool a fellow 93 3500HD owner, does yours have the straight axle front end?
kimagine
09-22-2006, 07:14 PM
cool a fellow 93 3500HD owner, does yours have the straight axle front end?
No, it has the independent front end, nor does it have a flat bed or dually set up.:(
It is easier to work on from what I've found though.;)
Mark
hddamage
09-22-2006, 11:50 PM
nice shady place to fall asleep under there while listening to the drip drip of oil into the pan... although i learned to change oil hot now... keeps me alert:D