nekkidhillbilly
09-13-2006, 11:54 PM
my 04 has been missing for the last little bit
would a fuel filter be causing this it only does it when you 1st start after you drive it a few mins it quits
Tutts
09-14-2006, 10:30 AM
When was the fuel filter changed last? It seems that dirty fuel filters are a big cause of a lot of problems.
aychdee
09-14-2006, 01:43 PM
my 04 has been missing for the last little bit
Have you looked in your garage:joke: I agree with the fuel filter idea. My '05 had a slight stumble at idle and when I changed the filter it disappeared. give it a shot. Get 'em cheap at Kennedy performance.:ro)
txguppy
09-14-2006, 04:43 PM
Did you find your missing truck?:D :lol: Anyway, check your fuel filter.
mike p
09-14-2006, 09:32 PM
my 05 2500hd has a slight miss just rolling down the road,once every other week,just one stumble and its ok,i think im due for a fuel filter again
nekkidhillbilly
09-16-2006, 12:16 AM
it hasnt been changed since i bought it i have no clue before but ive only put 5 k on it but it could have been on there since new
txguppy
09-16-2006, 04:51 PM
Spend the $25 and change your fuel filter, then tell us how it's running.:ro)
nekkidhillbilly
09-17-2006, 12:25 AM
i will i turned the elevate idile on it hasnt since i have
nekkidhillbilly
09-20-2006, 11:50 PM
changed it its fine now
got 37k out of the factory one :eek:
nekkidhillbilly
09-29-2006, 02:04 AM
ok its doing it still but its only when it gets real wet out it hadnt rained so i had no problem but now id do when it rains
OH NO, Fuel filters are steeling trucks :eek: :eek: :eek:
Did you happen to replace the Air Filter too? If fuel filter haden't been replaced then the air filter may not have been either.
Give that a try.
jc
nekkidhillbilly
09-29-2006, 04:58 AM
the gauge thing on the side is showing its good and it looks like new?
05 bullet
09-29-2006, 03:59 PM
have you got the latest updates from dealer? Mine had a sputter thought it was filter too. Check a few other things but what fixed my problem was the reflash for the EGR recurculation GM came out with all it was cutting the % of exaust put back into motor to be reburned. It is my understanding all LLY motors have the recurcultion system I could be wrong can someone confirm
nekkidhillbilly
09-29-2006, 08:15 PM
would the blocker take care of that