Anybody purchased key fobs from keylessking* on ebay? - Diesel Place : Chevrolet and GMC Diesel Truck Forums
 
Home Forum Market Place Garage Lounge (0) Tuning Library DTC Tool Register Vendors
Go Back   Diesel Place : Chevrolet and GMC Diesel Truck Forums > Speciality Forums > Electrical
Register FAQ Forum Rules My Replies My Threads Mark Forums Read Auto EscrowAuto LoansInsurance

DieselPlace.com is the premier Duramax Diesel Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools
Old 09-12-2013, 08:40 PM   #1 (permalink)
thunder550
Diesel Master
 
thunder550's Avatar
 
Join Date: Sep 2007
Location: Phoenix, AZ
Posts: 1,229
iTrader Score: 0 reviews

Anybody purchased key fobs from keylessking* on ebay?

I bought a set of 2 LHJ011 for my 2005 truck, and neither will program. My OEM remote will still program, so I know I'm following the steps correctly. I sent them an email and a video I took showing my steps, just curious if anyone else has had issues with anything purchased from them and how it was resolved.
__________________
2011 LML CCSB Silverado - stock
1999 RCSB 1500 4x4 Silverado - LLY/Allison swapped - 5300 lbs - 1/2 ton running gear - 3.42 gears - TrueTrac - LBZ mouthpiece - homemade EGR delete - SDP downpipe - 5" Diamond Eye exhaust - LML DS manifold - Alligator PCV reroute - PPEI tuned - Kennedy twin lift pumps & mega filter - 1500 e-fans, dccontrol fan controller - 12.97 @ 104.7, 1.87 60' on stock trans w/o lift pump
Offline  
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 09-12-2013, 09:51 PM   #2 (permalink)
snowman22
Diesel Technician
 
snowman22's Avatar
 
Join Date: Mar 2013
Location: SoCal
Posts: 448
iTrader Score: 0 reviews

I have no direct experience with them, but be careful buying keyfobs from a major distributor. I needed a new one for my LB7 and 2 months later my buddy for his LBZ, we both separately ordered them from Amazon.

Long story short, they all work on the same damn frequency and we ended up locking each other keys in our trucks a few times.....After that I have no faith that my truck is safe and have a viper waiting to go in when I feel like dealing with a remote start.

Just food for thought.
__________________
2003 LB7 CCLB 310K miles
duramaxtuner.com ECU, Mike L Trans and Cooler, ProFab Intake Horn and Down Pipe, PPE boost valve, Blocked EGR, IAH Delete, FASS 150 Titanium, MBRP 4", Edge Insight CS
Offline   Reply With Quote Quick reply to this message
Old 09-12-2013, 10:45 PM   #3 (permalink)
TheBac
Diesel Laureate
 
TheBac's Avatar
 
Join Date: Nov 2003
Location: Mid-Michigan
Posts: 12,008
iTrader Score: 3 reviews

I bought two fobs for my son's Grand Prix from them. Not problems at all with them. Programming was easy. From their auctions, it looks like they have a 60day return policy, and offer a phone number to call for help. (215) 948-2434

Were they used remotes or new? Did they send you the correct part number/ID remotes? Could the batteries be dead in them?
__________________
Tom

"BBT" 2003 GMC 2500HD CC/SB 4x4
12.14 @ 111.15


2003 Olds Aurora 4.0 -- the "new" car

Success is getting what you want. Happiness is wanting what you get.

Reality is a matter of perspective.

I know just enough to be dangerous.
Offline   Reply With Quote Quick reply to this message
Old 09-12-2013, 11:11 PM   #4 (permalink)
thunder550
Diesel Master
 
thunder550's Avatar
 
Join Date: Sep 2007
Location: Phoenix, AZ
Posts: 1,229
iTrader Score: 0 reviews

They were new, and the part number is the same as my OEM remote (LHJ011). I didn't test the batteries, that's a good idea.
__________________
2011 LML CCSB Silverado - stock
1999 RCSB 1500 4x4 Silverado - LLY/Allison swapped - 5300 lbs - 1/2 ton running gear - 3.42 gears - TrueTrac - LBZ mouthpiece - homemade EGR delete - SDP downpipe - 5" Diamond Eye exhaust - LML DS manifold - Alligator PCV reroute - PPEI tuned - Kennedy twin lift pumps & mega filter - 1500 e-fans, dccontrol fan controller - 12.97 @ 104.7, 1.87 60' on stock trans w/o lift pump
Offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 09:55 AM   #5 (permalink)
cowboyjer
Diesel Technician
 
cowboyjer's Avatar
 
Join Date: Oct 2006
Location: Kansas
Posts: 464
iTrader Score: 0 reviews

I bought two, and programmed both with my original. I had some difficulty to start. The truck kept exiting programming mode before the new programming was completed because it was taking a long time. I ended up programming each remote by itself, then going back and reprogramming with both the new remotes, and the original remote. The second time they program, it is much faster.
__________________
2003 Silverado 3500 Dually 6.6L LB7/Allison 5 Speed
Forest Green, LT Crew Cab, Four Wheel Drive (Or 6 counting the big butt)
4" Exhaust, Hypertech programmer,
RolNLock tonneau cover, Luverne SS running boards, Bilstein 5100 shocks,
Ultra Phantom aluminum wheels, Tahoe overhead console with Homelink,
Kenwood DDX 814 DVD Head Unit, Nictane adapter and Cat filter, Fass Platinum fuel system.

Pulling a 2004 CM Norstar 4 horse slant as fast as I want to go.

Member #489
Offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 12:45 PM   #6 (permalink)
Shasta
Diesel Specialist
 
Shasta's Avatar
 
Join Date: May 2007
Location: Colorado, and sometimes New Mexico, Idaho, Tennessee and Washington D.C.
Posts: 915
iTrader Score: 0 reviews

Quote:
Originally Posted by snowman22 View Post
Long story short, they all work on the same damn frequency and we ended up locking each other keys in our trucks a few times.....After that I have no faith that my truck is safe and have a viper waiting to go in when I feel like dealing with a remote start.

Just food for thought.
Of course they all work on the same frequency. Just like garage door openers. But they have a rolling code that changes every time you use it. I'm finding it hard to believe that they have ever worked on each others truck once, much less a few times.

Any chance you programed them around each others truck? That might account for the condition you indicate - the rolling code is shared between the two trucks?
__________________
2003 GMC 2500 Ext Cab 4X4. Great truck, should have kept it instead of buying the lemon...

2006 GMC 3500 CC 4X4 Steel Grey, Pewter Leather, Bone Stock - GONE TO LEMON LAND!!

2008 GMC LMM 3500 CC 4X4 Deep Blue Metallic - everything except NAV Thanks GM. (Hope all the ground wires are tight on this one!!) Great truck but time to move up.

2012 Chevrolet LML 3500 CC 4X4 Blue Granite LTZ
Offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 01:19 PM   #7 (permalink)
snowman22
Diesel Technician
 
snowman22's Avatar
 
Join Date: Mar 2013
Location: SoCal
Posts: 448
iTrader Score: 0 reviews

Quote:
Originally Posted by Shasta View Post
Of course they all work on the same frequency. Just like garage door openers. But they have a rolling code that changes every time you use it. I'm finding it hard to believe that they have ever worked on each others truck once, much less a few times.

Any chance you programed them around each others truck? That might account for the condition you indicate - the rolling code is shared between the two trucks?
Nope, I was at work when he programmed his. Still to this day they lock and unlock both trucks, 6 months later.
__________________
2003 LB7 CCLB 310K miles
duramaxtuner.com ECU, Mike L Trans and Cooler, ProFab Intake Horn and Down Pipe, PPE boost valve, Blocked EGR, IAH Delete, FASS 150 Titanium, MBRP 4", Edge Insight CS
Offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 02:09 PM   #8 (permalink)
Shasta
Diesel Specialist
 
Shasta's Avatar
 
Join Date: May 2007
Location: Colorado, and sometimes New Mexico, Idaho, Tennessee and Washington D.C.
Posts: 915
iTrader Score: 0 reviews

Quote:
Originally Posted by snowman22 View Post
Nope, I was at work when he programmed his. Still to this day they lock and unlock both trucks, 6 months later.
Must be a total coincidence they ended up with the same rolling code sequence. Have you tried reprogramming just one of the trucks to see if that helps?

I was showing my neighbor how to do his by going through it at the same time with mine. Sure enough all the remotes opened both trucks. I reprogrammed mine again, and it was never a problem again.
__________________
2003 GMC 2500 Ext Cab 4X4. Great truck, should have kept it instead of buying the lemon...

2006 GMC 3500 CC 4X4 Steel Grey, Pewter Leather, Bone Stock - GONE TO LEMON LAND!!

2008 GMC LMM 3500 CC 4X4 Deep Blue Metallic - everything except NAV Thanks GM. (Hope all the ground wires are tight on this one!!) Great truck but time to move up.

2012 Chevrolet LML 3500 CC 4X4 Blue Granite LTZ
Offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 02:45 PM   #9 (permalink)
thunder550
Diesel Master
 
thunder550's Avatar
 
Join Date: Sep 2007
Location: Phoenix, AZ
Posts: 1,229
iTrader Score: 0 reviews

Found an auto parts store with a key fob tester. The fobs are supposed to continue transmitting as long as the button is pushed, correct? See video below...the OEM remote from my 2011 is first, then I test the new ones I got for my 2005. The new ones for the 05 look like they transmit for a split second when the button is pushed, then stop transmitting.

__________________
2011 LML CCSB Silverado - stock
1999 RCSB 1500 4x4 Silverado - LLY/Allison swapped - 5300 lbs - 1/2 ton running gear - 3.42 gears - TrueTrac - LBZ mouthpiece - homemade EGR delete - SDP downpipe - 5" Diamond Eye exhaust - LML DS manifold - Alligator PCV reroute - PPEI tuned - Kennedy twin lift pumps & mega filter - 1500 e-fans, dccontrol fan controller - 12.97 @ 104.7, 1.87 60' on stock trans w/o lift pump
Offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 05:53 PM   #10 (permalink)
thunder550
Diesel Master
 
thunder550's Avatar
 
Join Date: Sep 2007
Location: Phoenix, AZ
Posts: 1,229
iTrader Score: 0 reviews

I'm facepalming myself over here on their responses so far. At least they are responding I guess...but clearly are not reading or comprehending what I'm telling them....

Quote:
Originally Posted by me
I just got a new set of LHJ011 remotes for my 2005 Silverado from you today. I am not able to program these remotes.

These were bought under the name Chris Wessel on eBay auction 111100124686, transaction 1079953636001.

I have one OEM remote that I am able to successfully program, so I know that I'm entering the programming sequence correctly. Here's a video I took to show the steps I took:

VID_20130912_175715_360.mp4 - YouTube

Do you have any suggestions?

Thanks,

Chris
Quote:
Originally Posted by them
Chris



please confirm that you have held down bot the lock and unlock buttons down for up to 5 minutes for each remote
Quote:
Originally Posted by me
Hi,

I did try the entire 5 minutes with both remotes. Neither of them would program.
Quote:
Originally Posted by me
I just took the key fobs down to a parts store that has a tester. My OEM remote transmits the whole time I have the button pressed, but the new ones I got only transmit for a split second and stop, even when I keep holding the button down. Could this be part of the issue?

Here's a video... VID_20130913_120009_420.mp4 - YouTube
Quote:
Originally Posted by them
Chris



you have purchased the wrong remote, your truck is the new body style and you purchased the old body style remote (this is noted in the item description)



this is the reason it is not working (notice how the part numbers and look are different)



here is the correct remote you may return the incorrect one for a refund



GM Keyless Remote Key Fob Clicker - OUC60270 15913421



kk(Returns)

420 dresher rd

bsmt #400

horsham pa 19044
Quote:
Originally Posted by me
The truck in question is a 2005. The first remote in the video I posted was for reference only to show how the tester was working, it's from my 2011 truck. I understand the difference between the two. I am trying to program the LHJ011 remotes that I bought from you to my 2005 Silverado. The part number matches the OEM remote that I have for the 2005, so I know I purchased the correct ones.
__________________
2011 LML CCSB Silverado - stock
1999 RCSB 1500 4x4 Silverado - LLY/Allison swapped - 5300 lbs - 1/2 ton running gear - 3.42 gears - TrueTrac - LBZ mouthpiece - homemade EGR delete - SDP downpipe - 5" Diamond Eye exhaust - LML DS manifold - Alligator PCV reroute - PPEI tuned - Kennedy twin lift pumps & mega filter - 1500 e-fans, dccontrol fan controller - 12.97 @ 104.7, 1.87 60' on stock trans w/o lift pump
Offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Diesel Place : Chevrolet and GMC Diesel Truck Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

PLEASE READ! You must check your email inbox for the confirmation link to complete registration. Please check your spam box if you do not see the email in your inbox.

User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Programming key fobs Cripknievel Electrical 4 01-13-2012 10:38 PM
Key fobs not working at all... motovet Duramax Fourth Generation: 2007.5-2010 (LMM) 27 08-19-2010 01:24 PM
key fobs NO NAME Electrical 2 03-27-2010 02:39 PM
Two OEM key fobs TEXMudder Closed / Archived Marketplace Ads 4 11-30-2008 07:50 PM
Key Fobs Kampzite Closed / Archived Marketplace Ads 5 09-05-2006 09:26 PM


All times are GMT -4. The time now is 07:08 AM.


Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.
© AutoGuide

SEO by vBSEO 3.6.0