I've been having my "engine overheated" message come up intermittenly and the sometimes it goes into limp mode. I have fixed it by putting the edge cts back to stock then right back into level 1 or 2.
Now today i went to start my truck after sitting for 3 days and it was smoking like hell and the idle was all over the place. I tried to drive it and it smoked and sputtered up the driveway till it went into limp mode and told me to shut down due to low oil pressure. i watched for a few seconds and the oil pressure was from 0 - 60psi staying closer to 0-10 most of the time. i got her limped back after a series of re-programs and 100' drives. I read the codes and one is P0193 FRP sensor circuit high voltage (P0192 LOW voltage has come in a few times previous to this too.) The other is P0652 - Sensor reference voltage B circuit low voltage.
Anyone ever experienced this, or know what my issues are?
Now today i went to start my truck after sitting for 3 days and it was smoking like hell and the idle was all over the place. I tried to drive it and it smoked and sputtered up the driveway till it went into limp mode and told me to shut down due to low oil pressure. i watched for a few seconds and the oil pressure was from 0 - 60psi staying closer to 0-10 most of the time. i got her limped back after a series of re-programs and 100' drives. I read the codes and one is P0193 FRP sensor circuit high voltage (P0192 LOW voltage has come in a few times previous to this too.) The other is P0652 - Sensor reference voltage B circuit low voltage.
Anyone ever experienced this, or know what my issues are?