Edge CTS Race and EGR On Stock Truck - Diesel Place : Chevrolet and GMC Diesel Truck Forums
 
Home Forum Market Place Garage Lounge (0) Tuning Library DTC Tool Register Vendors
Go Back   Diesel Place : Chevrolet and GMC Diesel Truck Forums > Power, Performance & Tuning > Fourth Generation Duramax Electronics/Tuners
Register FAQ Forum Rules My Replies My Threads Mark Forums Read Auto EscrowAuto LoansInsurance

DieselPlace.com is the premier Duramax Diesel Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools
Old 08-21-2011, 03:03 PM   #1 (permalink)
vtsquid
Diesel Specialist
 
vtsquid's Avatar
 
Join Date: Apr 2010
Location: USA
Posts: 569
iTrader Score: 0 reviews
Send a message via Yahoo to vtsquid

Edge CTS Race and EGR On Stock Truck

Hey.Will the Edge CTS Race disable the EGR while maintaining DPF.Stock tune?Thanks for any info on this.
__________________
_____________________
2008 LMM Silverado 2500 LTZ ECSB 4X4.
Aftermarket calibration by Danville Performance (Autocal w/DSP5), PCV re-route,EGR blocked, Nicktane with Baldwin BF7587, PPE lift pump with Baldwin BF1212 water separator, 285/75/17 Dura Grapplers on H2s, CTS Insight with pyro, Large fender mod.
Proud Member U/A Local 693 Plumbers/Pipefitters.
Online  
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-21-2011, 03:41 PM   #2 (permalink)
luckyman
Diesel Technician
 
luckyman's Avatar
 
Join Date: Sep 2006
Location: Wherever I park it
Posts: 461
iTrader Score: 1 reviews

I don't think you can delete anything running the stock tune.
__________________
2010 Silverado 3500HD Crew Cab Dually
Offline   Reply With Quote Quick reply to this message
Old 08-21-2011, 04:44 PM   #3 (permalink)
vtsquid
Diesel Specialist
 
vtsquid's Avatar
 
Join Date: Apr 2010
Location: USA
Posts: 569
iTrader Score: 0 reviews
Send a message via Yahoo to vtsquid

Quote:
Originally Posted by luckyman View Post
I don't think you can delete anything running the stock tune.
Thanks.I just want to disable EGR.I don't mind doing a blocker plate but unsure if I can get just a "fingerstick" for LMM.
__________________
_____________________
2008 LMM Silverado 2500 LTZ ECSB 4X4.
Aftermarket calibration by Danville Performance (Autocal w/DSP5), PCV re-route,EGR blocked, Nicktane with Baldwin BF7587, PPE lift pump with Baldwin BF1212 water separator, 285/75/17 Dura Grapplers on H2s, CTS Insight with pyro, Large fender mod.
Proud Member U/A Local 693 Plumbers/Pipefitters.
Online   Reply With Quote Quick reply to this message
Old 08-21-2011, 05:37 PM   #4 (permalink)
Tanc Crusher
Diesel Sr. Technical Member
 
Tanc Crusher's Avatar
 
Join Date: Jan 2006
Location: Seymour, Indiana
Posts: 9,629
iTrader Score: 0 reviews

INDP Member

No fingers stick for the LMM. Also Edge has stop selling of all their Race version tuners for all Diesels from Ford, Dodge, and GM.

Brian
__________________
2007.5 GMT-900 Chevrolet Silverado 2500HD CC/LB LTZ 4x4 Summit White. 4-18-2007. Powered by the LMM Duramax 365hp/660tq coupled to the MW7 Allison 1000 6-speed through the NP1 NP263XHD Transfercase.
Upgrades: Performance Truck Products for 5" MBRP Turboback 6020AL. Alligator Performance for EGR Blocker. DuramaxTuner for EFI-Live with DSP5 ECM Tune and TCM tune. Meyer Performance for Airdog 150 Gen 1 Lift Pump, Diamond Down Pipe. Merchant Automotive for Suncoast IV with 1056 converter, Amsoil Synthetic Fluid in everything, Pitman Arm Fix.
Configure your FlashScan V2 the way it should be http://www.dieselplace.com/forum/sho...d.php?t=401770
Future: SDP S475 Twin Setup is here-install 6-18-11. On board Air with Side Step Tube Air Tanks, Custom Bed Fuel Tank and Water/Meth Tank.
New Toy: 2012 Dodge Challenger SRT8 Red and all stock for now.

Check out: My Garage for pics of the Truck, Mods, and Toys.
UA Steamfitter, Local 136 Evansville, IN
Offline   Reply With Quote Quick reply to this message
Old 08-22-2011, 10:19 AM   #5 (permalink)
mreeves23
Supporting Vendor
 
mreeves23's Avatar
 
Join Date: Feb 2006
Location: Poseyville, IN
Posts: 3,624
iTrader Score: 23 reviews
Send a message via AIM to mreeves23

INDP Member

Midwest Smokers Member

I still have a couple race version edge units in stock if needed. You could delete the dpf and egr system and run a stock power level tune with the Edge units. However, you will have to delete both the egr and dpf or just the dpf system. Can't do just the EGR system and run with the dpf intact as far as I know. I personally haven't tried this but am pretty sure that is the case. If you disabling the EGR system, you might as well delete the DPF system as well. No fingerstick is available for the LMMs either as stated.
__________________
Daily Driver: 2008 Chevrolet Silverado 3500HD CCLB Dually, 4x4, Duramax LMM, Black, 4" Cognito Lift, UCAs, HD Tie Rods, Idler/Pitman Braces, Bilsteins, Sulastic Shackles, 33" Nitto TGs, 22" Alcoa Classic 10 lug Semi Wheels, Airlift helper bags and wireless controller, Line-X, Triple Autometer Gauges, Custom Audio/Video

Show Truck: 2007 Chevrolet Silverado 3500HD SRW, CCLB, 4x4, Duramax LMM/Allison, Custom 4-link Suspension, 2.5 Ton Rockwells, 2" Ouverson Engineering Shafts and Lockers, 2.5 King Coilovers, 54" Boggers on 20x16 Chromed Custom Stazworks wheels, Suncoast Stage III, Suncoast Billet Rear Trans Housing, Custom Paint, Custom Interior, Custom Audio/Video System

Last edited by mreeves23; 08-22-2011 at 10:20 AM.
Offline   Reply With Quote Quick reply to this message
Old 08-22-2011, 01:02 PM   #6 (permalink)
vtsquid
Diesel Specialist
 
vtsquid's Avatar
 
Join Date: Apr 2010
Location: USA
Posts: 569
iTrader Score: 0 reviews
Send a message via Yahoo to vtsquid

Thanks guys.Good to know.Don't want to do any deletes just yet.Just looking for a way to stop recycling soot through my engine.
__________________
_____________________
2008 LMM Silverado 2500 LTZ ECSB 4X4.
Aftermarket calibration by Danville Performance (Autocal w/DSP5), PCV re-route,EGR blocked, Nicktane with Baldwin BF7587, PPE lift pump with Baldwin BF1212 water separator, 285/75/17 Dura Grapplers on H2s, CTS Insight with pyro, Large fender mod.
Proud Member U/A Local 693 Plumbers/Pipefitters.
Online   Reply With Quote Quick reply to this message
Old 08-22-2011, 01:17 PM   #7 (permalink)
CRASHNBURN
Diesel Master
 
CRASHNBURN's Avatar
 
Join Date: Dec 2005
Location: Braham, Mn
Posts: 4,608
iTrader Score: 1 reviews

TN Diesel Place Club Member

Quote:
Originally Posted by vtsquid View Post
Thanks.I just want to disable EGR.I don't mind doing a blocker plate but unsure if I can get just a "fingerstick" for LMM.
Even if they made a fingerstick for the LMM. I can tell you that the non race CTS with a fingerstick will not prevent the code, it will eventually show up. That why the race tuners were nice. If you did that sort of thing.
__________________
2006 LBZ Duramax 4x4 CC SB 2500HD SRW 4x4 Blocked & Fingered, Fumoto valve, Keystone Ram Air Good Hood, Banks Ram Air System with Super Scoop, Banks Monster Dual Exhaust with Cat & Muffler delete pipes, Edge insight, Access cover & Rhino over the rails, 33'-0" Dutchman fifthwheel, Tekonsha Prodigy Brake Controller.

(Special thanks to Edge Products -Aaron Stewart & Rob Story.... Peter Treydte & Jeff Barker from Banks Power, Keith from Hptuners)

Used Tuners
CTS Race with backup camera, Edge Juice, Edge Evolution & Edge Evolution Race all with hot codes. Banks sixgun & Ottomind. HPTuners Pro version.

Thank you to all the troops out there.
Offline   Reply With Quote Quick reply to this message
Old 08-22-2011, 04:41 PM   #8 (permalink)
luckyman
Diesel Technician
 
luckyman's Avatar
 
Join Date: Sep 2006
Location: Wherever I park it
Posts: 461
iTrader Score: 1 reviews

Quote:
Originally Posted by mreeves23 View Post
You could delete the dpf and egr system and run a stock power level tune with the Edge units.
I have an Edge Evo CS Race. I would love to be able to run the stock tune and do a dpf delete. Could you explain to me how this is done please?

I won't say it isn't possible, but Edge's instructions certainly don't indicate any way of doing it. According to the instructions, you either run a tune or you run stock. The dpf delete is an option that you input when you setup a tune to run.

Thanks for your feedback.
__________________
2010 Silverado 3500HD Crew Cab Dually
Offline   Reply With Quote Quick reply to this message
Old 08-23-2011, 07:35 AM   #9 (permalink)
DiRtY_LmM_MaX
Diesel Enthusiast
 
Join Date: Aug 2011
Location: north jersey
Posts: 10
iTrader Score: 0 reviews

hey Tanc Crusher, do you know when exactly and why exactly edge stopped making the evo race. i just bought the evo cts race and 5 inch exhaust for my truck and installed it 2 weeks ago. i just wanna make sure i didnt make the wrong decision
Offline   Reply With Quote Quick reply to this message
Old 08-23-2011, 05:06 PM   #10 (permalink)
Tanc Crusher
Diesel Sr. Technical Member
 
Tanc Crusher's Avatar
 
Join Date: Jan 2006
Location: Seymour, Indiana
Posts: 9,629
iTrader Score: 0 reviews

INDP Member

The reason on their webiste is that they have come to the conclusion that those using the race tuner to defeat the emission items are drivng them on the road where they clearly state for off road use only. So I believe they stopped before maybe something law suit wise happens. There are still some out there but they no longer will produce the Race version ones. There is a more detail reason over on Edge site to read.

Brian
__________________
2007.5 GMT-900 Chevrolet Silverado 2500HD CC/LB LTZ 4x4 Summit White. 4-18-2007. Powered by the LMM Duramax 365hp/660tq coupled to the MW7 Allison 1000 6-speed through the NP1 NP263XHD Transfercase.
Upgrades: Performance Truck Products for 5" MBRP Turboback 6020AL. Alligator Performance for EGR Blocker. DuramaxTuner for EFI-Live with DSP5 ECM Tune and TCM tune. Meyer Performance for Airdog 150 Gen 1 Lift Pump, Diamond Down Pipe. Merchant Automotive for Suncoast IV with 1056 converter, Amsoil Synthetic Fluid in everything, Pitman Arm Fix.
Configure your FlashScan V2 the way it should be http://www.dieselplace.com/forum/sho...d.php?t=401770
Future: SDP S475 Twin Setup is here-install 6-18-11. On board Air with Side Step Tube Air Tanks, Custom Bed Fuel Tank and Water/Meth Tank.
New Toy: 2012 Dodge Challenger SRT8 Red and all stock for now.

Check out: My Garage for pics of the Truck, Mods, and Toys.
UA Steamfitter, Local 136 Evansville, IN
Offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Diesel Place : Chevrolet and GMC Diesel Truck Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can Edge Race be set back to stock setting? plus egt probe question lynx Fourth Generation Duramax Electronics/Tuners 4 08-06-2011 03:34 PM
Edge Evo Race on stock truck 72commando Fourth Generation Duramax Electronics/Tuners 14 06-23-2010 01:52 PM
How many guys with EDGE race are running level 4 on stock tranny? spooolin Fourth Generation Duramax Electronics/Tuners 28 06-15-2010 04:10 AM
will edge evo race and stock lb7 exhaust work? milehighmax Fourth Generation Duramax Electronics/Tuners 2 12-03-2009 02:29 PM
Edge CS, CTS, & Race in stock DSTRBD Vendor Info & Specials 1 09-19-2009 01:46 PM


All times are GMT -4. The time now is 01:18 PM.


Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.
© AutoGuide

SEO by vBSEO 3.6.0